Abstract:In the manufacture of cold rolled tubes, the process performance of the rolling mill and the deformed metal is determined by tool calibration. The method of calibration calculation, the method and equipment of its reproduction significantly affect the deformability and quality of pipes, the cost of rolling tools, productivity, and in general the efficiency of cold (warm) rolling of pipes. Tool calibration is the distribution of individual compressions along the length of the working stroke of the rolls, determined by the shape and size of the grooves and the mandrel. The need to improve the calibration of rolling tools is determined by the ever-increasing requirements for pipe production products. In this article, it is proposed to set the function of relative reductions as a product of elementary functions. In the course of the work, the coefficients of the proposed function were determined from the condition of the minimum load on the gauge at the pre-calibration section to ensure the minimum longitudinal difference in the thickness of the pipes. Calibration and forces during rolling of stainless thin-walled pipes of size 95×2 mm by the improved method have been calculated using MS Excel. The force parameters of rolling, calculated using the improved method, are compared with the forces calculated using other well-known calibration calculation methods. It is shown that the proposed technique provides lower values of force on most of the crimping section, which allows reducing longitudinal variation of pipes and increasing durability of calibers. To assess the accuracy of rolled pipes, the calculation of the elastic deformation of the stand was carried out depending on the force in the pre-calibrating section. The calculated value shows that the proposed improved method of tool calibration allows rolling pipes of increased accuracy. The developed procedure involves the use of size 95×2 mm pipes made of 12X18H10T steel for rolling in order to produce from a two-pass scheme to a single-pass scheme while ensuring the required high cost of pipes.

Establishment and validation of optimization model for two roller die of cold rolled stainless steel tubes

Influence of rolling force optimization on thickness accuracy of 20-high cold-rolling mill of silicon steel

Technology Optimization Analysis of Three-Roll Rotary Piercing Process for Seamless Steel Pipe

Optimization Design Of A Novel X-Type Six-High Rolling Mill Based On Maximum Roll System Stiffness

Modelling of the Rolling Process of Titanium Alloy Tube Billets in Laboratory Conditions on a RSP 14-40 Rolling Mill

Optimization of Mechanical Properties during Cold Rolling and Wrap-Forming for Metal Helical Tubes

Modeling of cold pilgering of stainless-steel tubes

Numerical Simulation and Parameter Design of Strip Cold Rolling Process of 301L Stainless Steel in 20-Roll Mill

A theoretical model for roller-shape design of three-roller continuous and synchronous calibration process of ovality and straightness for large thin-walled pipes

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Optimization Design of Extrusion Roller of RP1814 Roller Press Based on ANSYS Workbench

A double-layer optimization model for flatness control of cold rolled strip

Improvement of tool calibration in cold pilligrim rolling mill

Stiffness Analysis and Structure Optimization of Rolling Mill for Lithium-ion Battery Electrode Manufacturing

Numerical Prediction of Microstructure Evolution of Small-Diameter Stainless Steel Balls during Cold Skew Rolling

Investigation on the Structure Profile of Precise Copper Tube by Three-Roll Planetary Rolling Based on Finite Element Simulation Assisted by Machine Learning

Influence of Cold-Rolling Processes on the Dimensional Accuracy and Roughness of Small-Diameter Thick-Walled Seamless Tubes

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

The Design and Simulation of Roller for Machining Involute Spline

Theoretical Modeling and Verification of Roll-shearing Force of Thick Hollow Hexagonal Stainless Steel Tube

Numerical Model Simulation of the Double-Roll Rotary Forging of Large Diameter Thin-Walled Disk