Abstract:The central deformation extent of the thick plate can be improved and the approaching uniform deformation will be realized by the snake/gradient temperature rolling (SGTR). At present, the existing rolling force analytical models cannot be directly used for SGTR because of the great difference with the synchronous rolling. The rolling force model should be established so as to meet the production demand of the SGTR with different roll diameters. The thick plate is divided into three layers according to the numerical results of the short-term ultra-fast cooling for the thick plate. The deformation region is simplified into different zones and layers according to the temperature gradient and neutral point position. The traditional von Mises yield criterion was optimized by the introduced coefficients c1 and c2 according to the slip line field theory to correct the deviation caused by the uniform and shear stress assumption. The specific pressure equation is established by the slab method. The deformation region with different composition cases is analyzed, and the rolling force and torque analytical models are established according to the boundary conditions on this basis. The short-term ultra-fast cooling and rolling process were simulated by ANSYS software. The deformation resistance gradient produced by short-term ultra-fast cooling and roll diameter ratio are the main factors to affect the rolling force, while the roll offset has little effect on the rolling force because of its small proportion in the deformation region. The position of neutral points not only affects the rolling torque, but also changes its direction in certain conditions. The model precision was analyzed, and the rolling force calculated by the established analytic model is in good agreement with the numerical method, which serves as a theoretical basis for the rolling mill design and process parameter setting.

Theoretical Modeling and Verification of Roll-shearing Force of Thick Hollow Hexagonal Stainless Steel Tube

A theoretical model for roller-shape design of three-roller continuous and synchronous calibration process of ovality and straightness for large thin-walled pipes

FEM Simulation and Analysis of Roll-Box Model of Square Steel Tubes

Mathematical Models of Stable Roll Load of Double Stands Thin Gauge Strip Temper Mill

Model of Metal Microstructure Evolution Considering Shear Effect and Its Simulation Application in Rolling of Heavy Cylinders

Deduction of a quadratic velocity field and its application to rolling force of extra-thick plate

Finite element analysis on the roll milling process of twisted oblate tube

Finite element analysis of circle-to-rectangle roll forming of thick-walled rectangular tubes with small rounded corners

Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters

Mechanical Modeling of Tube Bending Considering Elastoplastic Evolution of Tube Cross-Section

Modeling and analysis of multi-pass progressive flanging force of copper tube end

Research on the axial elongation and springback law of thick-walled tubes in cold bending forming

Numerical Simulation of the Roll Forming Process of Aluminum Folded Micro-channel Tube

Analytical Model for Tube Hydro-Forging: Prediction of Die Closing Force, Wall Thickness and Contact Stress

A Study of 3D Finite Element Modeling Method for Stagger Spinning of Thin-Walled Tube

Rolling force model of V-shaped variable thickness rolling based on energy approach

Application of MMC Model on Simulation of Shearing Process of Thick Hot-Rolled High Strength Steel Plate

Research on the analytical model of rolling force for TiAl alloy pack rolling

Mathematical modeling and analysis of the tailor rolled blank manufacturing process

A fast calculation method of large-cylinder asymmetrical rolling force considering shear effect

Numerical Simulation and Parameters Analysis for Roll Forming of Martensitic Steel MS980