Abstract:Expansion tubes are the main energy absorber of coupler and draft gear used on high-speed trains. With the rapidly increasing demand for energy-absorbing, the stroke is trying to extend without enhancing the action force. However, a stability problem occurred at one dynamic test due to the misalignment of coupler seats leading to the offset of load. The contact zone's structural strength of the conical die contributes much to lateral stability. A reasonable geometric configuration was investigated, and a square die was proposed. The square die has a longer conical surface and extra oblique line contact by filling the gaps between the tube and die. Quasi -static experiments, finite element simulations, and an analytical model were performed to investigate square-die expansion tubes' deformation and mechanical properties. The square-die expansion has a similar action force and specific energy absorption (SEA) as the circular-die expansion. At an expansion angle of 30 degrees, the contact length of the square-die expansion tubes was 3 similar to 17.34 times those of the circular-die expansion. In addition, the square-die expansion tube has a higher specific energy absorption than the circular-die expansion tube at the same contact length. The effect of the contact length on stability and the application of a square-die expansion tube on the coupler under the offset load condition were examined. The square-die expansion tube maintained stability even for the misaligned amount of the coupler seats of up to 60 mm. These achievements pave an effective way for the future design of long-stroke expansion tubes.

An Improved Two-Arcs Deformational Theoretical Model of the Expansion Tubes

A Theoretical Study of the Expansion Metal Tubes

A Theoretical Model of the Shrinking Metal Tubes

Energy Absorption of Expansion Tubes Using a Conical-Cylindrical Die: Theoretical Model

A Theoretical Model of the Inversion Tube over a Conical Die

Energy absorption of expansion tubes using a conical–cylindrical die: Experiments and numerical simulation

Theoretical Model of a Metal Tube under Inversion over Circular Dies

Influence of mechanical properties of tube on forming limits and deformation characteristics in expansion drawing process

A Novel Deformation Mode of Expansion Tubes Accounting for Extra Contact

A revised theoretical model for external inversion process over a circular die

Behaviour of expansion tubes under impact load: Deformation mode and mechanical response

Plastically Deformed Tubes Subjected to Mechanical Expansion Processes

An Analytical Model for the Collapsing Deformation of Thin-Walled Rectangular Tube in Rotary Draw Bending

Experimental and Numerical Simulation Investigation on Tubular Expansion Process

Expansion of Sandwich Tubes With Metal Foam Core Under Axial Compression

Study on the Expansion Force of TWIP Steel Expandable Tubular in Solid Expandable Tubular Technology

Study on the Homogeneity of Deformation under Electromagnetic Expansion of Metal Tube

A Constitutive Model for Anisotropic Tubes Incorporating the Variation of Contractile Strain Ratio with Deformation

An Improved Theoretical Model of a Metal Tube under Free External Inversion

Solid expandable tubular forming behavior based on twin shear stress yield criterion: Analytical, numerical simulation and experiment

Deformation Behavior of Tube in Electromagnetic Forming with an External Die