A Graphene Field Effect Transistor Driven by a MEMS Lamb Wave Resonator

Ji Liang,SunChen
DOI: https://doi.org/10.11784/tdxbz201809025
2019-01-01
Abstract:With an increase in consumer needs,resonator functions need to be optimized and extended without an increase in their sizes. A typical approach to realize this is to integrate micro-electro-mechanical system(MEMS)reso-nators with integrated circuits(ICs). Transistors driven by resonators exhibit outstanding performance. Previously studied devices are based on surface acoustic wave(SAW)resonators,which have a low frequency,large size,and fail to be monolithically integrated with transistors. To overcome such disadvantages,a graphene field effect transis-tor(FET)driven by a MEMS lamb wave resonator(LWR)is proposed in this paper. Owing to the acousto-electric(AE) effect,the acoustic waves generated by the resonator transport the carriers in graphene,which results in a current. The AE current can be detected by a pair of electrodes and tuned by gate voltage. Through the finite element method(FEM),we predict the performance of the resonator. There exist the following three modes:A0,S0,and S1. The measured performance of the fabricated device agrees well with the results of simulation. The three modes each succeeded in exciting an AE current,and 2.9 GHz(S1 mode)was the highest frequency that could induce an AE current. Focusing on the S0 mode,the AE current increased with an increase in radio frequency power. Because of limited power handling,the current exhibited nonlinearity with respect to the input RF power. The gate voltage can tune the mobility and the conductivity in grapheme;thus,it can tune the AE current. The LWR-driven graphene FET has a higher frequency and smaller size and demonstrates a novel way for integration of microchips.
What problem does this paper attempt to address?