Abstract:The quasi-rigid body model is the relationship model between the volume error and the geometric error of the CMM under the consideration of simple deformation. The quasi-rigid body model reflects the comprehensive influence of all geometric errors and ensures the calibration accuracy of geometric errors. However, the geometric error solution based on the quasi-rigid body model has the problem of multicollinearity. To solve this problem, in this study, the geometric errors of CMM are compensated using laser tracing multistation measurement technology and the LASSO (Least absolute shrinkage and selection operator, LASSO) algorithm. First, a laser tracing multi-station measurement model is established, and then the coordinates of the laser tracer station are obtained by solving the redundant equations provided by the laser tracer multi-station measurement system using the L-M (Levenberg Marquardt) algorithm. The global positioning system localization principle combined with the L-M algorithm is used to determine the actual position of the CMM measurement point. Then, the volume error is determined by calculating the difference between the actual position of the measurement point and the planned position. A mathematical model of the volumetric and geometric errors is obtained from the CMM quasi-rigid body model, and the LASSO algorithm is used to solve the model to obtain the 17 geometric errors of the CMM. Using the relationship between the volume error and the uniaxial geometric error, the 4 rotational errors are solved of εz (x), εx- (z), εv (z), εz (z). To verify the measurement accuracy of the compensated CMM, the compensation effect is verified by using the XL80 interferometer with the measuring block. The experimental results indicate that when error compensation is performed, the measurement accuracy of the CMM is improved by >50% compared to the initial state, and no mechanical processing is involved.

Study on the linear regression method for straightness error of coordinate measuring machine

Novel Enhancing Resolution Method for Measurement Straightness Error

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Survey of rolling angle measurement methods

Measuring Straightness Method with Common Path Compensation for Laser Drift

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Analyzing characteristic of the cube-corner retroreflector applied to laser straightness measurement

Measuring Error Correction Method During Deflection Measurement Process of the Regular Hexagon Section Shaft Based on Lever-Type Measuring Mechanism

Registration Error Analysis and Evaluation in Large-Volume Metrology System

LASSO based compensation method for geometric errors of large coordinate measuring machine

Study of coordinate measuring machines synthetic dynamic error under different positions and speeds based dual linear returns

Study on the Uncertainty of Straightness Errors Base on New Generation Geometrical Product Specification

Machining Error Inspection of T-spline Surface by On-Machine Measurement

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

A study on mutative scale straightness measurement based on uncertainty analysis

A Target-Based Self-Calibration Method for Terrestrial Laser Scanners and Its Robust Solution

The Partial Least-Squares Regression Analysis of Impact Factors of Coordinate Measuring Machine Dynamic Error

A trimmed moving total least-squares method for curve and surface fitting

Calibration of the Geometric Error Parameters of Laser Trackers in Site Environments