Abstract:A novel annealing process of controlled heating rate is used to produce severe cold-formed aluminum plates, which are processed into aluminum foil and mainly used for high-voltage electrolytic capacitor anodes. The experiment in this study focused on various aspects such as microstructure, recrystallization behavior, grain size, and grain boundary characteristics. The results revealed a comprehensive influence of cold-rolled reduction rate, annealing temperature, and heating rate on recrystallization behavior and grain boundary characteristics during the annealing process. The heating rate applied plays a crucial role in controlling the recrystallization process and the subsequent grain growth, which ultimately determines whether or not the grains will become larger. In addition, as the annealing temperature rises, the recrystallized fraction increases and the grains size decreases; conversely, the recrystallized fraction decreases as the heating rate increases. When the annealing temperature remains constant, the recrystallization fraction increases with a greater deformation degree. Once complete recrystallization occurs, the grain will undergo secondary growth and may even subsequently become coarser. If the deformation degree and annealing temperature remain constant, the increased heating rate will result in a lower recrystallization fraction. This is due to the inhibition of recrystallization, and most of the aluminum sheet even remains in a deformed state before recrystallization. This kind of microstructure evolution, grain characteristic revelation, and recrystallization behavior regulation can provide effective help for enterprise engineers and technicians to guide the production of capacitor aluminum foil to a certain extent, so as to improve the quality of aluminum foil and increase the electric storage performance.

Development and Examination of Ultra-Thin High Voltage Anode Aluminum Foil with Strong Cube Texture

Micro-process of Cube Texture Formation in High Purity Aluminum Foils by Cross Shear Rolling

Influence Of Recrystallization Annealing On The Cube Texture In High-Purity Aluniinuni Foils

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Increasing Cube Texture in High Purity Aluminium Foils for Capacitors

Mechanical Properties and Microstructure of Rolled and Electrodeposited Thin Copper Foil

Influence Of Trace Re And Annealing On The Recrystallization Textures Of High Purity Al Anode Foils

Effect of Residual Deformation Energy and Critical Heating Rate on Cubic Texture and Grain Growth Behavior of Severely Deformed Aluminum Foil

Enhancing Durability and Capacity Retention of Ultrafine-Grained Aluminum Foil Anodes in Lithium-Ion Batteries

Effect of heating rate during annealing on microstructure and texture evolution of AA8021 aluminum foil

Microstructural Evolution and Mechanical Behavior of Pure Aluminum Ultra-Thin Strip under Roller Vibration

Texture Control of Commercial Zn Foils Prolongs Their Reversibility As Aqueous Battery Anodes

Microstructure and Texture Evolutions of Aa1050 Aluminum Alloy Cold Rolled to High Strains

Fabrication and Characterization of the Hierarchical AAO Film and AAO-MnO2 Composite As the Anode Foil of Aluminum Electrolytic Capacitor

Effect of cold rolling on microstructure and texture evolution in strip casting Fe-36%Ni invar alloy foil

Microstructure evolution in Cu-2.13Fe-0.026P (wt%): The contribution of texture intensity to residual stress variation

Microstructure and Texture Evolution in Cold-Rolled and Annealed Oxygen-Free Copper Sheets

Fabrication of Ultrathin Al Foils by Accumulative Pack Rolling: Influence of Pack Materials

Microstructure and Recrystallization Behavior of Heating Rate-Controlled Electrolytic Capacitor Aluminum Foil under Cold Forming and Annealing

Microstructure Evolution and Performance Enhancement of Sintered Aluminum Foils for Aluminum Electrolytic Capacitors

Research on the Anodic Aluminum Oxide As Anodic Foil of Aluminum Electrolytic Capacitor