Abstract:Tube flow forming followed by flattening is an effective way to make ultra-wide sheet for plastic forming of large thin-walled components. However, the work hardening and poor plasticity of flow formed sheet seriously restrict the subsequent plastic formability. To tailor the plastic formability, two types of heat treatments (recrystallization annealing and solution quenching) were conducted on the flow formed 2219 aluminum alloy sheet, and their microstructure evolution and mechanical properties were comparatively studied to obtain a suitable heat treatment scheme. It is found that the deformation in flow forming pro-duces quantities of deformed substructures and the rotating cubic texture. In the recrystallization an-nealing, recrystallization occurs with the co-existence of two nucleation mechanisms, i.e., subgrain nucleation and particle stimulated nucleation, which produce a weak {100}//RD-CD texture and higher plasticity than that of the flow formed sheet. In addition, it is found that the annealing temperature and holding time have complex interactive effects on the average grain size, the uniformity of grain size and the resultant plasticity. In contrast, the solution quenching obtains weak {100}parallel to RD-CD texture at lower solution temperature and cube texture at higher solution temperature, respectively; meanwhile, it produces larger average grain size and better grain size uniformity than the recrystallization annealing. Because the uniform grain size can suppress the heterogeneous deformation and the dissolution of second phase particles can delay the generation of crack, the solution quenched sheet presents better plasticity than the re -crystallization annealed sheet. Moreover, increasing the solution temperature can improve the plasticity. Therefore, it is suggested to take a solution quenching scheme with higher temperature (535 degrees C for 30 min) to tailor the flow formed sheet, which can get a similar elongation as that of the initial tube blank. (c) 2022 Elsevier B.V. All rights reserved.

Increasing Cube Texture in High Purity Aluminium Foils for Capacitors

Effects of Additional Rolling and Annealing on the Cube Texture in the High-Purity Aluminum Foils for Capacitors

The effect of final annealing on cube texture of high-purity aluminum foils

Influence of High Hot-Rolling Temperature and Multistage Annealing upon the Cube Texture of High Purity Aluminum Capacitor Foils

Influence of Pre-Annealing and Additional Deformation on the Recrystallization Texture of High-Purity Aluminum Foils

Effect of Pre-deformation and Annealing on Cube Texture in High Purity Aluminum Foils

Influence Of Recrystallization Annealing On The Cube Texture In High-Purity Aluniinuni Foils

Mechanism of strengthening of cube texture for high purity aluminum foils by additional-annealing

Development of cube texture in multistage annealing of high purity aluminum foils

Evolution of Recrystallization Textures in High Voltage Aluminum Capacitor Foils

Effect of hot finishing rolling on cube texture in high purity aluminum foils

Effect of Intermediate Annealing on Cubic Texture of High-purity Aluminum Foils

Micro-process of Cube Texture Formation in High Purity Aluminum Foils by Cross Shear Rolling

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Effect of Residual Deformation Energy and Critical Heating Rate on Cubic Texture and Grain Growth Behavior of Severely Deformed Aluminum Foil

The Effect of Middle Annealing on the Evolution of Textures in High Voltage Aluminum Capacitor Foils

Tailoring of the Microstructure and Mechanical Properties of the Flow Formed Aluminum Alloy Sheet

Microstructure and Recrystallization Behavior of Heating Rate-Controlled Electrolytic Capacitor Aluminum Foil under Cold Forming and Annealing

Influence of annealing on pitting uniformity of aluminum foil for high voltage electrolytic capacitor

Evolution of Microstructures and Textures of High Purity Aluminium During Rolling and Annealing

Effect of heating rate during annealing on microstructure and texture evolution of AA8021 aluminum foil