Abstract:Most prevailing processes are incapable of removing Cr(III)-organic complexes efficiently and facing the problem of in-process formation of highly toxic Cr(VI) based on oxidation. The efficient decomplexation of Cr(III) complexes and simultaneous abatement of Cr with low Cr(VI) accumulation would be desirable in treatment of Cr(III)-complexed wastewater. Here, we found efficient degradation of Cr(III)-EDTA and simultaneous removal of Cr by forming Cr2O3 precipitate from simulated solution as well as an electroplating effluent under UV irradiation. The results showed a complete degradation of Cr(III)-EDTA after reaction time of 60 min and 70-80% of TOC mineralization within 180 min as well. About 90% of Cr(III) precipitated as Cr2O3 simultaneously, with the residual total Cr below 1.5 mg/L. The degradation of Cr(III)-EDTA was a stepwise de-acetate group process, as proven by the obvious attenuation of peaks related to carboxyl groups and C-C bond from FT-IR spectra of Cr(III)-EDTA and significant mineralization of TOC after UV irradiation. Based on negligible accumulation of Cr(VI) (less than 0.1 mg/L) under N2-sparged condition, the C-centered radicals from the β-fragmentation of O-centered radicals formed by photo-induced ligand-to-metal charge transfer were responsible for the in situ reduction of intermediate Cr(VI), resulting in the low accumulation of Cr(VI). The addition of 20 mg/L Fe2+ was capable of removing the remaining Cr(VI) and total Cr, with Cr(VI) and total Cr less than 0.1 and 1.0 mg/L, respectively. Moreover, the photo-oxidation process combined with Fe2+ addition were efficient in removing other Cr(III) complexes, such as Cr(III)-citrate and those from a realistic electroplating effluent. We believe that this study would provide an alternative option for efficient degradation of Cr(III) complexes and simultaneous abatement of Cr from contaminated water.

Electrochemical Deposition of Cr from Cr3+ in the Mixed Electrolyte of [Bmim]oac/h2o

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Electrochemical Mechanism Of Cr(Iii) Reduction For Preparing Crystalline Chromium Coatings Based On 1-Ethyl-3-Methylimidazolium Bisulfate Ionic Liquid

Study on the Electrodeposition of Chromium from Cr(III) Solution in the Presence of Oxalate and Acetate Anions

Mechanism of Cr(III)-based Oxide-Hydroxide Film Electrodeposition in an Acidic Solution

Electro-reduction of Cr(III) ions under the effects of complexing agents and Fe(II) ions

Electrodeposition of Nanocrystalline Chromium Coatings from 1-Butyl-3-methylimidazolium-hydrogen Sulfate Ionic Liquid

Electrodeposition of Molybdenum in the [BMP]Tf2N Ionic Liquid at Low Temperature

Preparation of Crystalline Chromium Coating on Cu Substrate Directly by DC Electrodepositing from Wholly Environmentally Acceptable Cr(III) Electrolyte

Microstructure and corrosion behavior of Cr and Cr–P alloy coatings electrodeposited from a Cr(III) deep eutectic solvent

Towards cleaner production of trivalent chromium electrodeposition: Mechanism, process and challenges

Bioreduction of Chromate in a Methane-Based Membrane Biofilm Reactor

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Effect of Methoxypolyethylene Glycol on Trivalent Chromium Electrodeposition

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

Environmentally Friendly Chromium Electrodeposition: Effect Of Pre-Electrolysis On A Cr(Iii) Bath In An Anion-Exchange Membrane Reactor

Electrodeposition of High-Quality Cr Coatings with Solid Solution Al from Cr2+ Electrolyte

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

Atomic layer deposition of chromium oxide—An interplay between deposition and etching

Electrodeposition of Molybdenum from Water-in-Acetate Electrolytes

Recovering chromium from electroplating sludge using an integrated technology of bipolar membrane electrodialysis and H2O2 oxidation