Abstract:A large amount of Cr (VI)-polluted wastewater produced in electroplating, dyeing and tanning industries seriously threatens water ecological security and human health. Due to the lack of high-performance electrodes and the coulomb repulsion between hexavalent chromium anion and cathode, the traditional DC-mediated electrochemical remediation technology possesses low Cr (VI) removal efficiency. Herein, by modifying commercial carbon felt (O-CF) with amidoxime groups, amidoxime-functionalized carbon felt electrodes (Ami-CF) with high adsorption affinity for Cr (VI) were prepared. Based on Ami-CF, an electrochemical flow-through system powered by asymmetric AC was constructed. The mechanism and influencing factors of efficient removal of Cr (VI) contaminated wastewater by an asymmetric AC electrochemical method coupling Ami-CF were studied. Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) characterization results showed that Ami-CF was successfully and uniformly loaded with amidoxime functional groups, and the adsorption capacity of Cr (VI) was more than 100 times higher than that of O-CF. In particular, the Coulomb repulsion effect and the side reaction of electrolytic water splitting were inhibited by the high-frequency anode and cathode switching (asymmetric AC), the mass transfer rate of Cr (VI) from electrode solution was increased, the reduction efficiency of Cr (VI) to Cr (III) was significantly promoted and a highly efficient removal of Cr (VI) was achieved. Under optimal operating conditions (positive bias 1 V, negative bias 2.5 V, duty ratio 20%, frequency 400 Hz, solution pH = 2), the asymmetric AC electrochemistry based on Ami-CF can achieve fast (30 s) and efficient removal (>99.11%) for 0.5–100 mg·L−1 Cr (VI) with a high flux of 300 L h−1 m−2. At the same time, the durability test verified the sustainability of the AC electrochemical method. For Cr (VI)-polluted wastewater with an initial concentration of 50 mg·L−1, the effluent concentration could still reach drinking water grade (<0.05 mg·L−1) after 10 cycling experiments. This study provides an innovative approach for the rapid, green and efficient removal of Cr (VI) containing wastewater at low and medium concentrations.

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

One-step Treatment of Cr(III) Complexes Wastewater Using a P-doped Ti4O7 Anode in a Compact Flow Electrolysis Device

Removal of Chromium from CrEDTA Synthetic Wastewater Using Advanced Fenton-Hydroxide Precipitation Process

Carbon Fiber-Based Flow-Through Electrode System (FES) for Cr(VI) Removal at Near Neutral Phs Via Cr(VI) Reduction and In-Situ Adsorption of Cr (III) Precipitates

Separation and Recovery of Cr(Iii) and Cr(Vi) Using Electrodeionization As an Efficient Approach

Removal of Trivalent Chromium in the Complex State of Trivalent Chromium Passivation Wastewater

Electrochemical Cr(VI) removal from aqueous media using titanium as anode: Simultaneous indirect electrochemical reduction of Cr(VI) and in-situ precipitation of Cr(III)

Decreasing dissolved oxygen enhances in situ curtailment of intermediate Cr(VI) during photo-oxidative decomplexation of Cr(III)-EDTA

Outstanding performance of electro-Fenton process for efficient decontamination of Cr(III) complexes via alkaline precipitation with no accumulation of Cr(VI): Important roles of iron species

Removal of Chromium(Vi) from Wastewater by Combined Electrocoagulation-Electroflotation Without A Filter

Efficiency and potential mechanism of complete Cr(VI) removal in the presence of oxalate by catalytic reduction coupled with membrane filtration

Efficient removal and transformation of Cr(VI) from alkaline wastewater to form a ferrochromium spinel multiphase via a modified ferrite process

Recovering chromium from electroplating sludge using an integrated technology of bipolar membrane electrodialysis and H2O2 oxidation

A Novel Strategy for Treating Chromium Complex Wastewater: the Combination of a Fenton-like Reaction and Adsorption Using Cobalt/iron-Layered Double Hydroxide As Catalyst and Adsorbent

Asymmetric Alternative Current Electrochemical Method Coupled with Amidoxime-Functionalized Carbon Felt Electrode for Fast and Efficient Removal of Hexavalent Chromium from Wastewater

An Integrated Process for Removal and Recovery of Cr(VI) from Electroplating Wastewater by Ion Exchange and Reduction–precipitation Based on a Silica-Supported Pyridine Resin

Efficient Removal of Cr(III)-organic Complexes from Water Using UV/Fe(III) System: Negligible Cr(VI) Accumulation and Mechanism.

Highly Efficient Removal of Cr(Vi) from Electroplating Wastewater by Ferrous/Ferric Hydroxide Complexes: From Laboratory to Pilot-Scale Study

Efficient removal of Cr(VI) from contaminated kaolin and anolyte by electrokinetic remediation with foamed iron anode electrode and acetic acid electrolyte