Abstract:Being one of the most toxic pollutants commonly present in wastewater as soluble hexavalent chromium (Cr(VI)) specie, its concomitant adsorption and chemical reduction to relatively insoluble and less poisonous Cr(III) would be an effective strategy for remediation of Cr-polluted water. As such, a novel MXene-polyelectrolyte nanocomposite was typically synthesized for enhanced Cr(VI) removal. In detail, we applied polyethylenimine (PEI) to modify the Ti3C2Tx surfaces and synthesized Ti3C2Tx/PEI nanocomposites. The as-prepared composites were characterized by various methods such as SEM-EDX, N2 sorption-desorption isotherm, XRD, FTIR, and XPS. Further, the Ti3C2Tx/PEI was used to adsorb Cr(VI) for clarifying the kinetics, isotherms, and the effects of solution pH and coexisting ions on Cr(VI) removal by batch experiments. Our results show that coating of Ti3C2Tx nanosheets with PEI regulates surface charge of the as-synthesized adsorbent and creates it with a three-dimensional network, allowing the fast electrostatic adsorption of Cr(VI) anions to positively charged surface over wide pH range of 1–10 and promoting to achieve improved removal capacity maximum up to 186.5 mg/g. The Cr(VI) adsorption data were well fitted by the pseudo-second-order kinetic and Langmuir isotherm models. In addition, Ti3C2Tx/PEI also exhibits excellent selectivity for Cr(VI) anions over competing ones such as NO3 −, Cl−, ClO4 −, and SO4 2−. Time-dependent reaction routes of Ti3C2Tx/PEI nanocomposite toward Cr(VI) was studied by XPS, which confirmed the slow reduction of all sorbed Cr(VI) to Cr(III) in the dozens of hours and final in-situ Cr(III) immobilization, clarifying the sorption-reduction mechanism for Cr(VI) elimination. All these results suggest that Ti3C2Tx/PEI nanocomposite prepared by reported surface-modification approach available for developing other functionalized adsorbents, may be a potential candidate for decontamination of Cr(VI)-polluted wastewater.

Electrochemical Cr(VI) removal from aqueous media using titanium as anode: Simultaneous indirect electrochemical reduction of Cr(VI) and in-situ precipitation of Cr(III)

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

Efficient Removal of Cr(VI) by TiO2 Based Micro-Nano Reactor via the Synergy of Adsorption and Photocatalysis

Investigations on Photoelectrocatalytic Reduction of Cr(VI) over Titanium Dioxide Anode and Metal Cathode

The removal mechanism of Cr(VI) by calcium titanate: Insight into the role of surface reduced Cr(III) in removal process

Separation and Recovery of Cr(Iii) and Cr(Vi) Using Electrodeionization As an Efficient Approach

Simultaneous Removal of Cr(Ⅵ) and Cr(Ⅲ) by Titanate Nanosheets Through Photocatalysis Combined with Adsorption

Carbon Fiber-Based Flow-Through Electrode System (FES) for Cr(VI) Removal at Near Neutral Phs Via Cr(VI) Reduction and In-Situ Adsorption of Cr (III) Precipitates

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

Removal of Cr(VI) by 3D TiO2-graphene Hydrogel Via Adsorption Enriched with Photocatalytic Reduction

Construct interesting CuS/TiO2 architectures for effective removal of Cr(VI) in simulated wastewater via the strong synergistic adsorption and photocatalytic process

Electrocatalytic reduction of Cr(VI) over heterophase MoS2 film electrode

Removal of Cr(Vi) with Cogeneration of Electricity by an Alkaline Fuel Cell Reactor

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Cr(VI) and Cr(III) with TiO2 and Titanate Nanotubes

Outstanding performance of electro-Fenton process for efficient decontamination of Cr(III) complexes via alkaline precipitation with no accumulation of Cr(VI): Important roles of iron species

Efficient removal of Cr(VI) from contaminated kaolin and anolyte by electrokinetic remediation with foamed iron anode electrode and acetic acid electrolyte

Construction of α-Fe2O3 Nanorods/UiO-66-NH2 by in-situ Growth with Photocatalytic Reduction of Cr (VI)

One-step Removal of Cr(VI) at Alkaline Ph by UV/sulfite Process: Reduction to Cr(III) and in Situ Cr(III) Precipitation

Enhanced removal of Cr(VI) by reductive sorption with surface-modified Ti3C2Tx MXene nanocomposites

Construction of bubbles enrichment sites and gas-diffusion-microchannel to assist Cr(VI) electrochemical reduction in a flow-through electrochemical system

Ultra-fast and ultra-efficient removal of Cr (VI) by the aqueous solutions of monolayer MXene (Ti3C2Tx)