Abstract:The reactor coolant pump is a key equipment in a nuclear power plant. If the leakage exceeds a certain threshold, it may cause reactor overheating and shutdown. The reactor coolant pump leakage fault usually has two problems: corrosion and scaling. Accurately and efficiently diagnosing the leakage fault mode as early as possible and predicting its remaining useful life (RUL) are important for taking timely maintenance measures. In this paper, an integrated method is proposed. First, the cross-sectional area of the first seal is extracted as a fault indicator. The motivation is that corrosion may enlarge the cross-sectional area, and scaling may reduce the cross-sectional area. Based on the fluid mechanics theory, an integrated model with several uncertain parameters is established among the cross-sectional area, temperature, and leakage at the inlet and outlet of the first seal. In the diagnosing process, a modified change-detection method is proposed to detect the starting point of degradation. Then, the unknown parameters in the previous relation are estimated, and the degrading data before the starting point of degradation are used to diagnose the leakage fault mode. Second, a time-series model of the autoregressive integrated moving average (ARIMA) is established to predict the remaining useful life based on the degrading data after the starting point of degradation. Finally, the leakage degrading data from six reactor coolant pumps of a nuclear power plant is used to perform the leakage fault mode diagnosis and life prediction with degradation point detection error rates not exceeding 4%, fault mode diagnosis correction rates 100% and practical RUL predicting results, which proves that the proposed integrated method is accurate and efficient. The proposed integrated method combines the advantages of both the physical model diagnosis and the data-driven model diagnosis and innovatively make use of the quantity of flow from the output side of the primary pump as the monitoring indicator and the cross-sectional area as the characteristic index together to diagnose the leakage fault mode happened to the seal and predict its RUL, which can meet the needs of actual operation and maintenance to ensure a healthy and stable operation of the pump and prevent unexpected shutdowns of nuclear power plants and serious accidents.

Technology for CNP1000 shaft sealed reactor coolant pump

Discharge Capacity Analysis of Liquid Effluent Discharge System at CPR1000 Nuclear Power Plant

Engineering Development and Application of Hydrodynamic Mechanical Seal of Reactor Coolant Pump

Research And Practice Of Overpressure Protection System For Epr Primary Hydrostatic Test

Technological Development of the Forged Low Pressure Rotor of Nuclear Turbine in China

Study on the Characteristics of the Nuclear Reactor Coolant Pump During the Process-Divided Start-Up Period

Influence of Non-Uniform Inflow on Performance of Reactor Coolant Pump and Improved Design

Chinese Innovative Patent Technologies for the Reactor Pressure Vessel

Analysis of Pressure Pulsation Induced by Rotor-Stator Interaction in Nuclear Reactor Coolant Pump

Development of Mechanical Seal for Containment Spray Pump of PWR Nuclear Power Plant

Inception behavior of the cavitation in nuclear reactor cooling pump

Study on the Four-Quadrant Homologous Characteristic and Two-Phase Flow Head Degradation of a Reactor Coolant Pump

Preliminary Assessment of a Combined Passive Safety System for Typical 3-Loop PWR CPR1000

Accident Analyses for China Pressurizer Reactor with an Innovative Conceptual Design of Passive Residual Heat Removal System

The first digital reactor protection system in China

The Speed Coefficient Method Based Nuclear Main Pump Design and CFD Analysis

Mechanism of Combined Coning and Waviness Mechanical Face Seal for Nuclear Reactor Coolant Pump

The prospect of the modeling simulation for the passive containment cooling system of the advanced PWR in China

An integrated method for the leakage fault mode diagnosis and life prediction of the reactor coolant pump

Hydraulic Control Rod Drive Technology for Nuclear Reactors

Modular Design on Qualification Test System of Pumps of Nuclear Safety Grade