Abstract:In this study, a double volute centrifugal pump with relative low efficiency and high vibration is redesigned to improve the efficiency and reduce the unsteady radial forces with the aid of unsteady computational fluid dynamics (CFD) analysis. The concept of entropy generation rate is applied to evaluate the magnitude and distribution of the loss generation in pumps and it is proved to be a useful technique for loss identification and subsequent redesign process. The local Euler head distribution (LEHD) can represent the energy growth from the blade leading edge (LE) to its trailing edge (TE) on constant span stream surface in a viscous flow field, and the LEHD is proposed to evaluate the flow field on constant span stream surfaces from hub to shroud. To investigate the unsteady internal flow of the centrifugal pump, the unsteady Reynolds-Averaged Navier-Stokes equations (URANS) are solved with realizable k-epsilon turbulence model using the CFD code FLUENT. The impeller is redesigned with the same outlet diameter as the baseline pump. A two-step-form LEHD is recommended to suppress flow separation and secondary flow encountered in the baseline impeller in order to improve the efficiency. The splitter blades are added to improve the hydraulic performance and to reduce unsteady radial forces. The original double volute is substituted by a newly designed single volute one. The hydraulic efficiency of the centrifugal pump based on redesigned impeller with splitter blades and newly designed single volute is about 89.2%, a 3.2% higher than the baseline pump. The pressure fluctuation in the volute is significantly reduced, and the mean and maximum values of unsteady radial force are only 30% and 26.5% of the values for the baseline pump.

The Speed Coefficient Method Based Nuclear Main Pump Design and CFD Analysis

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Numerical Simulation of Three-Dimensional Flow Through Full Passage and Performance Prediction of Nuclear Reactor Coolant Pump

Dynamic analysis of the pump system based on MOC–CFD coupled method

Design Method of Water Jet Pump Towards High Cavitation Performances

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Numerical Simulation and Optimization of Internal Flow Field in the High Pressure Coal Conveying Pump Based on the Dynamic Mesh

The Optimization of A Low Specific Speed Pipeline Pump

Inception behavior of the cavitation in nuclear reactor cooling pump

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

A Study on Energy Saving of Condensate Pump Speed Regulation improvement for CPR1000 Nuclear Power Unit

Design and Improvements of Centrifugal Pumps with Low Specific Number of Speeds Based on Inner Flow Analysis

NUMERICAL SIMULATION OF FLUID-STRUCTURE COUPLING FOR THE MAIN PUMP OF LEAD COOLED FAST REACTOR

A Calculation Model of Flow Characteristic of Coolant Pump for Nuclear Reactor System

A cavitation performance prediction method for pumps PART3 feasible for axial-flow reactor coolant pump

Influence of the Impeller/Guide Vane Clearance Ratio on the Performances of a Nuclear Reactor Coolant Pump

Study on Cavitation Behavior of High-speed Mixed Flow Pump and Cavitation Performance Improvement Method

Theoretical and Numerical Modal Analysis for Nuclear Coolant Pump and its Scaled Rotor System

Aseismatic strength analysis of main nuclear reactor pump based on real three dimension model

Study on the hydraulic performance of the axial flow main coolant pump for lead-cooled fast reactor