Abstract:In this study, to improve the structural applications of glued laminated timber (glulam) in high RH environment according to its relatively lower MOE, fast-growing poplar laminae with a thickness of 35 mm were thermally treated at 200 degrees C for 3.5 h. The effects of thermal treatment and RH in the surrounding environment on laminae strength class was conducted. Afterward, 12 full-scale same-grade composition glulam beams made out of untreated and thermally treated poplar laminae were prepared. The four-point bending tests were conducted to reveal the effects of laminae thermal treatment and RH in the surrounding environment on flexural properties of glulam beams with a span-depth ratio of 18. The results showed that the strength class of fast-growing poplar laminae was negatively related to RH in the surrounding condition, and thermal treatment can contribute to the increase in strength class. In 90% RH, strength class increased from untreated laminae M(E)7 to the heat-treated laminae M(E)10, according the China standard. The relationship between bending properties of glulam beams and RH in the surrounding environment was negatively correlated, as well as thermal treatment, whereas MOE was improved significantly after thermally pretreated, especially in high RH. In 90% RH, MOE of glulam beams made of thermally pretreated laminae was 29.57% higher than the untreated beams with an MOR reduction of 8.82%. The results of characteristic load-deformation curves, characteristic load-strain curves, average extreme fiber strain, and the failure mode can support each other in this study. Industrial thermal treatment technology to laminae improved the MOE of glulam beams significantly in high RH with a reduction in MOR, and glulam beam made out of thermally treated fast-growing poplar laminae can be used in construction, but need checking in MOR or be used for a limited range of structural elements.

A New Rapid Drying Method Of 2.5cm-thick Oak Floor Blanks

Experimental research on fire safety of lightweight bamboo frame buildings

EFFECTS OF MOISTURE ON DRYING RATE OF MICRO- EXPLOSION-PRETREATED FAST-GROWING POPLAR WOOD

Energy Efficiency Performance Enhancement of Industrial Conventional Wood Drying Kiln by Adding Forced Ventilation and Waste Heat Recovery System: A Comparative Study

Indoor functional plywood with electrothermal response, flame retardancy, and moisture-proof performance and enhanced surface temperature with nano-SiO2 film

Effect of laser cutting of oak wood on the drying process

Effective strategy for fabricating surface impregnated and unilaterally densified wood with furfuryl alcohol/flame retardants for enhanced mechanical performance and flame retardancy

An Experimental Study of Flexural Behavior of Glulam Beams Made out of Thermally Treated Fast-Growing Poplar Laminae.

Experimental Research on Moisture Transfer, Burning and Charring Behavior of Glue Laminated Larch Under Fire Heating Using Cone Calorimeter

Impact of airflow on hem-fir kiln drying

Evaluating the Mechanical and Fire-Resistance Properties of Modified Fast-Growing Chinese Fir Timber with Boric-Phenol-formaldehyde Resin

Experimental and Numerical Studies on the Fire Performance of Thin Sustainable Wood-Based Laminated Veneers

Impulse drying of african teak, merbau and wenge wood blanks in a convection drying chamber

The Effect of Micro-Explosion on Average Drying Rate of Poplar

Effect of Expandable Graphite Flakes on the Flame Resistance of Oak Wood

Effect of Steam Explosion Treatments on Drying Rates and Moisture Distributions During Radio-Frequency/vacuum Drying of Larch Pillar Combined with a Longitudinal Kerf

Experimental Measurements of Thermal Conductivity of Wood Species in China: Effects of Density, Temperature, and Moisture Content

Optimization of mechanical properties and dimensional stability of densified wood using response surface methodology

Effect of superheated steam pressure on the physical and mechanical properties of sandwich-densified wood

Effect of supercritical CO2 treatment and kiln drying on collapse in Eucalyptus nitens wood

Preparation of highly-densified modified poplar wood by evacuating the micro-pores of wood through a gas expansion method