Abstract:This research has demonstrated that SiO 2 impregnation under high vacuum pressure of − 90 kPa can significantly reduce porosity by almost 10%, and improve the mechanical and viscoelastic properties of spruce wood under dry and saturated states. Characterization methods, such as impact test, DMA, SEM, EDS, porosity and SAXS tests were conducted on non-treated and − 90 kPa treated spruce wood samples under dry, saturated and submerged states to analyze the synergistic effect of high vacuum SiO 2 impregnation pressure on wood properties. The results showed that high vacuum impregnation pressure had a significant positive reinforcing effect on wood's properties. It increased the impact resistance of wood under dry and saturated conditions. Additionally, the high vacuum impregnation technique was able to overcome the water-induced softening effect and caused a significant increase in the storage modulus through uniform dispersion of the SiO 2 particles in the wood's vascular structure. Consequently, the impregnation reinforced the wood and ameliorated its capacity to absorb energy. High vacuum impregnation was also able to counteract the plasticizing effect of the water molecules and significantly increased the loss modulus by increasing the internal friction and cohesion of the wood components with the addition of the nanoparticles to the vascular system, which increased the wood's capacity to transform and dissipate energy. Quantitatively and qualitatively, impregnation under a vacuum pressure of − 90 kPa exhibited an effective obstruction of the vascular structure of spruce wood. In all conditions, high vacuum-impregnated samples showed significant enhancements over non-treated samples. This research demonstrated that high vacuum SiO 2 impregnation is an effective wood processing technique. Multiple materials and applications could benefit from this research wherein high strain-rate deformations are expected to occur or when simultaneous elastic behaviour of wood and its damping energy is needed. This study could also pave the way for research on the synergistic effect of SiO 2 impregnation and water absorption on the viscoelastic behaviour of wood.

EFFECTS OF MOISTURE ON DRYING RATE OF MICRO- EXPLOSION-PRETREATED FAST-GROWING POPLAR WOOD

The Effect of Micro-Explosion on Average Drying Rate of Poplar

The Pit Membrane Changes of Micro-Explosion-pretreated Poplar

Effects of High-Pressure Treatment on Poplar Wood: Density Profile, Mechanical Properties, Strength Potential Index, and Microstructure

Effects of Compressed Air Explosion Treatment on the Permeability of Poplar

Effect of High-pressure Densification on Moisture Sorption Properties of Paulownia Wood

Delayed Elastic Strain and Set-Recovery Evaluation in High-Pressure Densified Hybrid Poplar Wood – New Assessment Considerations

High-pressure Densification and Hydrophobic Coating for Enhancing the Mechanical Properties and Dimensional Stability of Soft Poplar Wood Boards

The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions

Decay resistance and mechanical strength of poplar wood treated after injection treatment to living trees using ammoniacal copper quaternary/carbon dots

Response Surface Modeling Equilibrium Moisture Content of High Pressure Treated Paulownia Wood

Dyeing of Poplar Wood Through High-Pressure Processing: Performance Evaluation

Preparation and drying characteristics of poplar wood modified by hexacyclite

Preparation Optimization of Enhanced Poplar Wood by Organic–Inorganic Hybrid Treatment via Response Surface Methodology

Effects of High-Temperature Heat Treatment Modification by Impregnation on Physical and Mechanical Properties of Poplar

Mechanical Properties and Dimensional Stability of Poplar Wood Modified by Pre-Compression and Post-Vacuum-Thermo Treatments

Effect of superheated steam pressure on the physical and mechanical properties of sandwich-densified wood

Effect of microwave treatment on the wood structure of Norway spruce and radiata pine

Study on Poplar Densification by Cross-Grain Compression

Integrated approach for improving mechanical and high-temperature properties of fast-growing poplar wood using lignin-controlled treatment combined with densification

Preparation of highly-densified modified poplar wood by evacuating the micro-pores of wood through a gas expansion method