Abstract:In this paper, the brittle–ductile transition lapping mechanism is presented for mechanical lapping of single-crystal diamond cutting tools. The calculated critical depths of cut for controlling brittle–ductile transition in different orientations and on different planes are used to direct tool lapping and deduce the dynamic micro-mechanical strengths (such as tensile, shearing and compressive strengths) of diamond cutting tools, while in the tool fabrication. The investigation illustrates that the dynamic micro-mechanical strengths have great anisotropy, and the strengths in the ‘soft’ direction are all less than those in the ‘hard’ direction on any crystal plane. The lapping of designed cutting tools, oriented (110)–(100) and (100)–(100) as tool rake and flank faces respectively, is carried out in ductile mode based on the optimal lapping parameters as selected. Both atomic force microscope (AFM) and scanning electron microscope (SEM) measurements results show that the lapping quality of diamond cutting tools is much improved with the proposed lapping approach. The surface roughness on the tool rake face is 0.8nm (Ra) and lapped cutting edge radius is 35–50nm as achieved when (110)–(100) orientations are selected as rake and flank faces; and the rake face surface roughness is 0.7nm (Ra) and lapped cutting edge radius is 30–40nm as the rake and flank faces oriented with (100)–(100) combination. Theoretical analyses of the dynamic impact effects on the cutting edge radius are undertaken to predict their ultimate cutting edge radii. Theoretical calculations indicate that the extreme cutting edge radius can be sharpened down to 1–6nm of the (110)–(100) oriented tools, and 2–5nm for the (100)–(100) oriented cutting tools.

Mechanical Lapping Single Crystal Diamond

The material removal mechanism in mechanical lapping of diamond cutting tools

The dependency of diamond lapping surface morphology on crystal orientation

Compound Processing Technique for Single Crystal Diamond with Mechanical Lapping and Chemically Assisted Mechanical Polishing

Lapping of Single Crystal Diamond Tools

The Ultimate Sharpness of Single-Crystal Diamond Cutting Tools—part I: Theoretical Analyses and Predictions

Mechanical Lapping and Chemical-Mechanical Polishing Process for Single Crystal Diamond

Material Removing Mechanism for Mechanical Lapping of Diamond Cutting Tools

Contact accuracy and orientations affecting the lapped tool sharpness of diamond cutting tools by mechanical lapping

Mechanism of polishing lutetium oxide single crystals with polyhedral diamond abrasive grains based on molecular dynamics simulation

Time Series Analysis For The Mechanical Lapping Of Single Crystal Diamond Cuffing Tools

Nano-precision diamond cutting tools achieved by mechanical lapping versus thermo-mechanical lapping

Optimizing the flatness of 4H-silicon carbide wafers by tuning the sequence of lapping

Finite Element Simulation of Surface Deformation of Polycrystal with a Rough Surface under Repeated Load

Effects of processing parameters and grinding direction on the material removal mechanism of (100) surface single crystal diamond in self-rotating mechanical grinding

The Factors Influencing on Cutting Edge Radius of Ultra-Precision Diamond Cutting Tools in Mechanical Lapping

A Study on the Diamond Lapping Direction Determination

Research on Subsurface Damage of Lapping Sapphire with Diamond Fixed Abrasive

Surface Topography Evolution of Single Crystal Silicon in Laser Polishing

Mechanism and Techniques of Mechanical Lapping of Nature Diamond Cutting Tools' Nose Arc

Surface and subsurface cracks characteristics of single crystal SiC wafer in surface machining