Abstract:This paper employs the Finite Element Method (FEM) to simulate and analyze the effects of corrosion defect parameters on the stress and failure pressure of pipelines. It investigates how the boundary conditions of the pipeline model influence stress and examines the sensitivity of failure pressure to corrosion defect parameters. A nonlinear regression equation has been developed from a dataset obtained through simulation experiments to predict the failure pressure of corroded pipelines. To validate the effects of corrosion defect parameters on failure pressure, a hydrostatic test platform for an API 5L X65 pipeline with corrosion defects was established to measure stress levels and failure pressures across varying corrosion defects. The study reveals that failure pressure is negatively correlated with corrosion length and depth, while positively correlated with corrosion width. Among these parameters, corrosion depth exerts a more significant influence on the pipeline's failure pressure than corrosion length and width. Within the range of corrosion defect parameters examined, the maximum deviation of the prediction equation's results from the simulation results is 8.71%, with an average deviation of 5.81%. The standard deviation of the fitted residuals is 0.01837. Additionally, the maximum deviation between the predicted results and experimental measurements is 8.39%, with an average deviation of 7.77%. The strong agreement between the predicted results from the equation and the actual measured data underscores the effectiveness of the nonlinear regression equation.

Consequences prediction and analysis of pipe explosion considering fluid-structure interaction

Consequence Analysis of Premixed Flammable Gas Explosion Occurring in Pipe Using a Coupled Fluid-Structure-fracture Approach

Consequences Assessment of Explosions in Pipes Using Coupled FEM-SPH Method

Evaluation of Blast Wave from Hydrogen Pipeline Burst by a Coupled Fluid-Structure-rupture Approach

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Coupling Analysis Of Fluid-Structure Interaction In Fluid-Filled Elbow Pipe

Prediction of erosion defects and buckling pressure of pipe bend based on bidirectional fluid-structure interaction method

Study of Dynamic Fracture Behavior of Pressure Pipes

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Simulation and experimental verification on fluid-structure interaction of T-shaped pressure pipeline

Fracture of Cylindrical Shells Subjected to Internal Explosion: Numerical Simulation

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Incremental Dynamic Crack Propagation of Pipe Subjected to Internal Gaseous Detonation

Fluid–structure interactions between a near-field underwater explosion bubble and a suspended plate

Numerical Prediction on Dynamic Fracture of Tubes Subjected to Internal Gaseous Detonation

The destructive form and response analysis of buried concrete pipes under the action of internal explosion loads

The FEM Simulation and Full-Scale Blast Tests for Crack Deceleration in Gas Pipeline

Coupled Simulation of Explosion-Driven Fracture of Cylindrical Shell Using SPH-FEM Method

CEL-FE Numerical Analysis of Blastwave Pressure on Buried Pipeline Subjected to Subsurface and Surface Detonations, and Dynamic Response