Abstract:This paper investigates the three-dimensional crack propagation and damage evolution process of metallic column shells under internal explosive loading. The calibration of four typical failure parameters for 40CrMnSiB steel was conducted through experiments and subsequently applied to simulations. The numerical simulation results employing the four failure criteria were compared with the differences and similarities observed in freeze-recovery tests and ultra-high-speed tests. This analysis addressed the critical issue of determining failure criteria for the fracture of a metal shell under internal explosive loads. Building upon this foundation, the damage parameter D c , linked to the cumulative crack density, was defined based on the evolution characteristics of a substantial number of cracks. The relationship between the damage parameter and crack velocity over time was established, and the influence of the internal central pressure on the damage parameter and crack velocity was investigated. Variations in the fracture modes were found under different failure criteria, with the principal strain failure criterion proving to be the most effective for simulating 3D crack propagation in a pure shear fracture mode. Through statistical analysis of the shell penetration fracture radius data, it was determined that the fracture radius remained essentially constant during the crack evolution process and could be considered a constant. The propagation velocity of axial cracks ranged between 5300 m/s and 12600 m/s, surpassing the Rayleigh wave velocity of the shell material and decreasing linearly with time. The increase in shell damage exhibited an initial rapid phase, followed by deceleration, demonstrating accelerated damage during the propagation stage of the blast wave and decelerated damage after the arrival of the rarefaction wave. This study provides an effective approach for investigating crack propagation and damage evolution. The derived crack propagation and damage evolution law serves as a valuable reference for the development of crack velocity theory and the construction of shell damage evolution modes.

Incremental Dynamic Crack Propagation of Pipe Subjected to Internal Gaseous Detonation

Dynamic Response and Crack Propagation of Pre-Flawed Square Tube under Internal Hydrogen-Oxygen Detonation

Evaluation of Blast Wave from Hydrogen Pipeline Burst by a Coupled Fluid-Structure-rupture Approach

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Comparison of Mode-ⅰ Crack Propagation of Tube Subjected to Internal Hydrogen Static and Detonation Loading

Consequence Analysis of Premixed Flammable Gas Explosion Occurring in Pipe Using a Coupled Fluid-Structure-fracture Approach

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Numerical Prediction on Dynamic Fracture of Tubes Subjected to Internal Gaseous Detonation

Dynamic Fracture Response of Pre-Flawed Elbow Pipe Subjected to Internal Hydrogen-Oxygen Detonation

Crack propagation and damage evolution of metallic cylindrical shells under internal explosive loading

Dynamic Response of Pressurized Gas Pipes Subjected to Transverse Impact Loads

Study of Dynamic Fracture Behavior of Pressure Pipes

The Study on Crack Dynamic Propagation in the Rich Gas Transmission Pipelines

Consequences Assessment of Explosions in Pipes Using Coupled FEM-SPH Method

Consequences prediction and analysis of pipe explosion considering fluid-structure interaction

Initial Crack Propagation and the Influence Factors of Aircraft Pipe Pressure

Modeling the Crack Interference in X80 Oil and Gas Pipeline Weld

Analysis of Dynamic Fracture Mechanisms in Gas Pipelines

The destructive form and response analysis of buried concrete pipes under the action of internal explosion loads

The FEM Simulation and Full-Scale Blast Tests for Crack Deceleration in Gas Pipeline

A Damage Mechanics based Evaluation of Dynamic Fracture Resistance in Gas Pipelines