Abstract:A coupled fluid-structure-fracture approach was presented to study the dynamic fracture of pre-flawed elbow pipes subjected to internal hydrogen-oxygen detonation. The initial flaw is located at the extrados, crown and intrados of the elbow, respectively. The hydrogen-oxygen detonation was modeled by a user-programed burn method based on the CJ theory. The fracture of elbow pipe was simulated by a validated bivariate failure criterion which was deduced based on the adiabatic shear failure mechanism of materials at high strain rates. Results demonstrate that the presented approach can capture the detonation wave propagation and the complex crack extension and branching effectively. It is found the peak pressure at extrados is 2.9 times larger than that at intrados, but the hoop stresses and effective strains at the three initial flaw positions are comparable with each other, even the average amplitude of hoop stress at intrados is higher than those at extrados and crown. The increase of detonation pressure can lead to crack branching and makes more cracks propagate simultaneously. The crack initiating at crown tends to turn and run to the intrados when passing the transition sections of elbow, while the crack initiating at intrados is expected to branch here. The average crack speeds for forward cracks are 100-300 m/s, while the speeds are 70%-90% of the above for backward cracks. The branch crack speeds are generally less than 40% of those before branching. Furthermore, the elbow pipes with initial flaw at intrados generally have the largest total crack length, while elbow pipes with initial flaw at crown have the strongest resistance against crack propagation. It is also suggested that local bucking is an important feature that takes place in dynamic fracture processes of elbow pipes. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Consequence Analysis of Premixed Flammable Gas Explosion Occurring in Pipe Using a Coupled Fluid-Structure-fracture Approach

Evaluation of Blast Wave from Hydrogen Pipeline Burst by a Coupled Fluid-Structure-rupture Approach

Dynamic Response and Crack Propagation of Pre-Flawed Square Tube under Internal Hydrogen-Oxygen Detonation

Consequences prediction and analysis of pipe explosion considering fluid-structure interaction

Consequences Assessment of Explosions in Pipes Using Coupled FEM-SPH Method

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Incremental Dynamic Crack Propagation of Pipe Subjected to Internal Gaseous Detonation

Fracture of Cylindrical Shells Subjected to Internal Explosion: Numerical Simulation

Dynamic Fracture Response of Pre-Flawed Elbow Pipe Subjected to Internal Hydrogen-Oxygen Detonation

Analysis of Plastic Deformation of Pipes Due to Deflagration to Detonation Transition Using Static Equivalent Pressure

Numerical Prediction on Dynamic Fracture of Tubes Subjected to Internal Gaseous Detonation

Coupled Simulation of Explosion-Driven Fracture of Cylindrical Shell Using SPH-FEM Method

Computation on Pipe Dynamic Response Induced by Deflagration of H2 and Air Mixture

Study of Dynamic Fracture Behavior of Pressure Pipes

The FEM Simulation and Full-Scale Blast Tests for Crack Deceleration in Gas Pipeline

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

CFD Simulation on Gas Explosion Field in Linked Vessels

Analysis of Dynamic Fracture Mechanisms in Gas Pipelines

Experimental Investigation And Numerical Simulation Of Gas Explosion In Linked Vessels

Explosion impact strength calculation and failure analysis of glass fiber-reinforced composite pipe