Abstract:This paper investigates the three-dimensional crack propagation and damage evolution process of metallic column shells under internal explosive loading. The calibration of four typical failure parameters for 40CrMnSiB steel was conducted through experiments and subsequently applied to simulations. The numerical simulation results employing the four failure criteria were compared with the differences and similarities observed in freeze-recovery tests and ultra-high-speed tests. This analysis addressed the critical issue of determining failure criteria for the fracture of a metal shell under internal explosive loads. Building upon this foundation, the damage parameter D c , linked to the cumulative crack density, was defined based on the evolution characteristics of a substantial number of cracks. The relationship between the damage parameter and crack velocity over time was established, and the influence of the internal central pressure on the damage parameter and crack velocity was investigated. Variations in the fracture modes were found under different failure criteria, with the principal strain failure criterion proving to be the most effective for simulating 3D crack propagation in a pure shear fracture mode. Through statistical analysis of the shell penetration fracture radius data, it was determined that the fracture radius remained essentially constant during the crack evolution process and could be considered a constant. The propagation velocity of axial cracks ranged between 5300 m/s and 12600 m/s, surpassing the Rayleigh wave velocity of the shell material and decreasing linearly with time. The increase in shell damage exhibited an initial rapid phase, followed by deceleration, demonstrating accelerated damage during the propagation stage of the blast wave and decelerated damage after the arrival of the rarefaction wave. This study provides an effective approach for investigating crack propagation and damage evolution. The derived crack propagation and damage evolution law serves as a valuable reference for the development of crack velocity theory and the construction of shell damage evolution modes.

Fracture of Cylindrical Shells Subjected to Internal Explosion: Numerical Simulation

Coupled Simulation of Explosion-Driven Fracture of Cylindrical Shell Using SPH-FEM Method

Evaluation of Blast Wave from Hydrogen Pipeline Burst by a Coupled Fluid-Structure-rupture Approach

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Dynamic Response and Crack Propagation of Pre-Flawed Square Tube under Internal Hydrogen-Oxygen Detonation

Numerical Simulation of Spherical Shell's Fracture Caused by the Inside-Explosive Loading

Consequences Assessment of Explosions in Pipes Using Coupled FEM-SPH Method

Simulation of the Deformation and Failure Characteristics of a Cylinder Shell under Internal Explosion

Dynamic Fracture Characteristics of Cylindrical Steel Shell under Internal Blast Loading

Experimental and Numerical Investigations on the Dynamic Fracture of a Cylindrical Shell with Grooves Subjected to Internal Explosive Loading

Consequence Analysis of Premixed Flammable Gas Explosion Occurring in Pipe Using a Coupled Fluid-Structure-fracture Approach

Investigation of Crack Propagation and Failure of Liquid-Filled Cylindrical Shells Damaged in High-Pressure Environments

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Numerical Simulation and Dynamic Fracture Criteria of Thin Cylindrical Shells under Inner Explosive Loading

Numerical Prediction on Dynamic Fracture of Tubes Subjected to Internal Gaseous Detonation

Three-dimensional Multiscale Simulation on Fracture Behaviors of Cylindrical Shells Subjected to Inner Pressure and Surface Laser Irradiation

Crack propagation and damage evolution of metallic cylindrical shells under internal explosive loading

Numerical Simulation of Warship Broadside Protective Structure Rupture under Inner Explosion

Simulation of Cylindrical Shell Damage by Fragments and Shock Waves

Fracture Effects Of The Affused Steel Cylinders Induced By Inside Head-On Collided Of The Planar Shock-Waves

Investigation of the Fracture and Fragmentation of Implosively Driven Thin-Walled Cylindrical Shell: From Thermodynamic Analysis to CDEM Simulation