Abstract:The plain strain of AZ31 magnesium alloy sheet in magnetic pulse forming was investigated by numerical simulation and experimental method. Combination of uniform pressure coil and Holmberg’s specimen was employed to evaluate the plain strain of AZ31 sheet. The numerical simulation for magnetic pulse plain strain of AZ31 sheet is performed by means of ANSYS FEA software. The magnetic flux density of uniform pressure coil was distributed uniformly, especially at the center of gauged area of AZ31 sheet directly in relation to the deformation behavior of AZ31 sheet. The velocity of typical point increases as increasing energy, and the more position closes to the center of sheet the higher velocity achieves. The forming height is increased with increasing discharge voltage. Compared with C=768 µF and C=1536 µF, the capacitance of 1152 µF is more effective for forming, which is confirmed by experiments. The peak velocity at the center of sheet is about 105 m/s. The major strains of magnetic pulse plane strain lie approximately in the strain ranges of 5.83-6.45%. However, the 3.22-3.82% (major strain) are the limit strains in quasi-static condition. The experimental results indicate that the major strain of AZ31 sheet improves about 75% compared with the quasi-static case.

Simulation of Gas Bulging and Prediction of Forming Limit for AZ31 Magnesium Alloy Sheet

Research on aluminum alloy sheet thermoplastic deformation behavior based upon warm bulging test

FE simulations of gas blow forming and prediction of forming limit diagram of AZ31 magnesium sheet

Forming Limits of Magnesium Alloy AZ31B Sheet at Elevated Temperatures

Simulation of Extrusion Process of AZ31 Magnesium Alloy

Extrusion Limit Diagram Making for AZ31B Magnesium Alloy Tubes by FEM Simulation

Local Hot Gas Forming of Long Axis Bellow with Non-uniform Temperature

Constitutive Model Development and the Numerical Study on the Drawability of AZ31 Sheet

Forming Limit Diagram Analysis Based on Crystal Plasticity for Magnesium Alloy Sheets

Standard and Strain Path Change Forming Limit Diagrams of AZ31B Magnesium Sheet at Elevated Temperatures

Forming Limit Analysis of Mg-2Zn-1.2Al-0.2Ca-0.2RE Alloy Sheet Using Ductile Fracture Models

Experimental and Numerical Research on Process Formability in Magnetic Pulse Forming of AZ31 Magnesium Alloy Sheets

Numerical simulation and experimental study of warm deep drawing of AZ31 magnesium alloy sheet

Simulation of the Extrusion Texture of Magnesium Alloy AZ31 Using Crystal Plasticity Finite Element Method

Hydro-bulging Forming of AZ41 Magnesium Alloy Tube

Quick Plastic Forming Behavior of Az91 Magnesium Alloy Sheet

Thermo-Mechanical Coupled Simulation of Warm Stamping of AZ31 Magnesium Alloy Sheet

Study on Gas Bulging Forming and Contradictive Cooling Bonding of AZ31/Al7475 Bimetal Composite Tube

Development and validation of an extrusion limit diagram for AZ31 magnesium alloy

Simulation and Experiment Analysis of Dual-directional Extrusion of AZ31 Mg Alloy

Hot Extrusion Simulation for AZ31B Mg Alloy Tubes and Construction of Extrusion Limit Diagram