Abstract:Magnesium (Mg) alloy sheets have attracted considerable attention as one of the most promising lightweight structural materials for weight reduction–oriented industries owing to their excellent properties compared with conventional materials. However, basal-textured Mg alloy sheets exhibit extremely inferior formability at room temperature due to their hexagonal close-packed structure and the limited number of active slip systems. Herein, an innovative warm incremental sheet forming assisted with oil bath heating approach to form difficult-to-form metal materials is proposed. To examine the forming quality of the approach, using springback as an evaluation index, a sequence of tests was conducted while forming AZ31B Mg alloy sheets according to a central composite design including response surface methodology and analysis of variance. The results indicated the approach was able to form Mg alloy sheets with great feasibility. The forming temperature (A), forming angle (B), step depth (C), and sheet thickness (D) are substantial factors that affect the springback, whereas the tool diameter (E) has a much less influential role compared with the individual effects of the other parameters, and the reasons for these results are explained. All the remaining interactive terms are substantial interactive factors except the AB, AE, BE, and CD terms, and a quadratic regression model gives the best fit with a 95% confidence level for springback. It was also indicated from the optimization results that to achieve a minimum springback value, the 166.3 °C forming temperature, 50.4° forming angle, 0.22-mm step depth, 1.18-mm sheet thickness, and 11.5-mm tool diameter should be selected.

Experimental Research on Formability of Stamping of AZ31B Magnesium Alloy Sheets

Constitutive Model Development and the Numerical Study on the Drawability of AZ31 Sheet

Experimental and numerical study of warm deep drawing of AZ31 magnesium alloy sheet

Thermo-Mechanical Coupled Simulation of Warm Stamping of AZ31 Magnesium Alloy Sheet

Forming Limits of Magnesium Alloy AZ31B Sheet at Elevated Temperatures

Numerical Simulation of Hot Stamping Forming of AZ Series Magnesium Alloys and Optimization of Die Process

Influence of Microstructure and Mechanical Properties on Formability in High Strain Rate Rolled AZ31 Magnesium Alloy Sheets

Press Forming in AZ31B Wrought Magnesium Alloy

Effect of Rolling Method on Microstructure and Properties of AZ31 Magnesium Alloy Thin Sheet

Experimental Investigation on the Springback of AZ31B Mg Alloys in Warm Incremental Sheet Forming Assisted with Oil Bath Heating

Numerical simulation and experimental study of warm deep drawing of AZ31 magnesium alloy sheet

Formability Improvement for Bending Magnesium Alloy AZ31 Sheet via Microstructural Control

Numerical Simulation of Warm Deep Drawing of AZ31 Magnesium Alloy Sheet with Variable Blank Holder Force

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Dramatically enhanced stamping formability of Mg–3Al–1Zn alloy by weakening (0001) basal texture

Microstructures, Tensile Properties and Forming Process of AZ31 Alloy Sheets

Warm deep drawing of square parts of AZ31 magnesium alloy sheet adopting variable blank holder force

Numerical Simulation of Warm Stamping of Magnesium Alloy Sheet Based on Thermo-mechanical Coupled Method

Formability of magnetic pulse uniaxial tension of AZ31magnesium alloy sheet

Experimental and Numerical Research on Process Formability in Magnetic Pulse Forming of AZ31 Magnesium Alloy Sheets

Experimental and simulation research on hollow AZ31 magnesium alloy three-channel joint by hot extrusion forming with sand mandrel