Abstract:Magnesium (Mg) alloy sheets have attracted considerable attention as one of the most promising lightweight structural materials for weight reduction–oriented industries owing to their excellent properties compared with conventional materials. However, basal-textured Mg alloy sheets exhibit extremely inferior formability at room temperature due to their hexagonal close-packed structure and the limited number of active slip systems. Herein, an innovative warm incremental sheet forming assisted with oil bath heating approach to form difficult-to-form metal materials is proposed. To examine the forming quality of the approach, using springback as an evaluation index, a sequence of tests was conducted while forming AZ31B Mg alloy sheets according to a central composite design including response surface methodology and analysis of variance. The results indicated the approach was able to form Mg alloy sheets with great feasibility. The forming temperature (A), forming angle (B), step depth (C), and sheet thickness (D) are substantial factors that affect the springback, whereas the tool diameter (E) has a much less influential role compared with the individual effects of the other parameters, and the reasons for these results are explained. All the remaining interactive terms are substantial interactive factors except the AB, AE, BE, and CD terms, and a quadratic regression model gives the best fit with a 95% confidence level for springback. It was also indicated from the optimization results that to achieve a minimum springback value, the 166.3 °C forming temperature, 50.4° forming angle, 0.22-mm step depth, 1.18-mm sheet thickness, and 11.5-mm tool diameter should be selected.

Formability Improvement for Bending Magnesium Alloy AZ31 Sheet via Microstructural Control

Enhancement of Tensile Ductility and Stretch Formability of AZ31 Magnesium Alloy Sheet Processed by Cross-Wavy Bending

Forming Limits of Magnesium Alloy AZ31B Sheet at Elevated Temperatures

Standard and Strain Path Change Forming Limit Diagrams of AZ31B Magnesium Sheet at Elevated Temperatures

Effect of Stretch Bending on the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Experimental Research on Formability of Stamping of AZ31B Magnesium Alloy Sheets

Plastic deformation of AZ31B magnesium alloy in the preform and electropulsing treatment process

Fabrication of Excellent Mechanical Properties AZ31 Magnesium Alloy Sheets by Conventional Rolling and Subsequent Annealing

Influence of Microstructure and Mechanical Properties on Formability in High Strain Rate Rolled AZ31 Magnesium Alloy Sheets

Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Processed by Cyclic Closed-Die Forging

An Experiment on Magnetic Pulse Uniaxial Tension of Az31 Magnesium Alloy Sheet at Room Temperature

Microstructures, Tensile Properties and Forming Process of AZ31 Alloy Sheets

Grain Refinement and Orientation of AZ31B Magnesium Alloy in Hot Flow Forming under Different Thickness Reductions

Deformation Behavior and Microstructure Evolution of AZ31 Mg Alloy by Forging–Bending Repeated Deformation with Multi-pass Lowered Temperature

Experimental Investigation on the Springback of AZ31B Mg Alloys in Warm Incremental Sheet Forming Assisted with Oil Bath Heating

Study on the Time-Dependent Mechanical Behavior and Springback of Magnesium Alloy Sheet (AZ31B) in Warm Conditions

Microstructure Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheet with Bimodal Texture under Bending Deformation

Varying the holding time to modify microstructure and improve forming angle precision of AZ31 magnesium sheet

Preparation of AZ31 Magnesium Alloy Thin-Walled Tubes by a New Type of Compound Extrusion by Direct Extrusion and Multi-Pass Bending

Strengthening Mechanism of Room Temperature Mechanical Properties for AZ31 Magnesium Alloy by Continuous Variable Cross section Direct Extrusion