Abstract:In automotive manufacturing, high strength materials, and aluminum alloys are widely used to address the requirement of ensuring a lightweight car body and correspondingly, reducing pollution. In this context of complexity of materials and structures, an optimized process design with finite element analyses (FEA) is mandatory, as well as a correct definition of the material forming limits. For this purpose, in sheet metal forming, the forming limit curve (FLC) is used. The FLC is defined by the onset of necking. The standard evaluation method according to DIN EN ISO 12004-2 is based on the cross-section method and assumes that the failure occurs due to a clear localized necking. However, this approach has its limitations, specifically in the case of brittle materials that do not exhibit a distinct necking phase. To overcome this challenge, a pattern recognition-based evaluation is proposed. Although pattern recognition and machine learning techniques have been widely employed in the medical field, few studies have investigated them in the context of analyzing metal sheet forming limits. The application of pattern recognition in metal forming is subject to the exact definition of the forming behaviors. Thereby, it is challenging to relate patterns on the strain distribution during Nakajima tests with the onset of necking for the FLC determination. Thus, the first approach was based on the crack evaluation, since this class is well-defined. However, of substantial interest is the evaluation of the general material instabilities that precede failure. Therefore, in the present study, the analysis of the material behavior during stretching is conducted in order to characterize instability classes. The results of Nakajima tests are investigated using an optical measurement system. A conventional pattern recognition approach based on texture features, considering the outcomes of expert interviews for the definition of classes is used for the FLC determination. Moreover, an analysis of the validity of the supervised learning is conducted. The results show a good prediction of the onset of necking, even for high strength materials with a recall of up to 92%. Some deviations are observed in the determination of the diffuse necking. The discrepancies of the different experts’ prognoses highlight the user-dependency of the FLC, suggesting further investigations with an data-driven approach, could be beneficial.

Development of a high-temperature double-layer bulge test for failure prediction in gas-based hot forming of a high-strength aluminium alloy

Research on aluminum alloy sheet thermoplastic deformation behavior based upon warm bulging test

Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models

Local Hot Gas Forming of Long Axis Bellow with Non-uniform Temperature

Development of a plane strain tensile test to characterize the formability of 5xxx and 6xxx aluminium alloys

On the Failure Prediction of Dual-Phase Steel and Aluminium Alloys Exposed to Combined Tension and Bending

Predicting Sheet Forming Limit of Aluminum Alloys for Cold and Warm Forming by Developing a Ductile Failure Criterion

Prediction of limit strains in hot forming of aluminium alloy sheets

Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions

Characterisation of new lubrication systems for hot forming of high strength aluminum alloys

Formability and microstructure of laser powder bed fused AlSi10Mg alloy sheets under various deformation conditions

A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations

M–K model based forming limit prediction of aluminum–lithium alloy 2060 and its application in hot stamping

Design and Optimization of the Local Laser Treatment to Improve the Formability of Age Hardenable Aluminium Alloys

Development of a novel in-situ measurement method for thermo-mechanically coupled material characterization of high-strength aluminum alloys

Experimental and Numerical Determination of Hot Forming Limit Curve of Advanced High-Strength Steel

Determination and Application of Forming Limit Diagram of Aluminium Alloy 5083 Sheet

Numerical prediction and experimental validation of forming limit curves of laminated half-hard aluminum sheets

Analysis of Forming Limits in Sheet Metal Forming with Pattern Recognition Methods. Part 1: Characterization of Onset of Necking and Expert Evaluation

Numerical modelling of the process chain for aluminium Tailored Heat-Treated Profiles