Abstract:Due to the slow scaling of board and package technology, on-chip inductor has shown promising potential to enable more compact design and smaller parasitics for inductor-based designs, such as voltage regulator, resonant clocking, filter, etc. On the other hand, conventional on-chip 2D spiral inductor must be placed on the top metal layers, thereby consuming significant routing resources for global interconnects. Moreover, it may need more dedicated shielding to prevent unnecessary coupling, which further increases its occupied area. With the popularity of 2.5D and 3D chip architecture, Through-Silicon-Via (TSV) has been widely used, a significant portion of which are placed for thermal/manufacturability/reliability purposes. Thus, those redundant TSVs can be utilized to form the on-chip inductor for 2.5D/3D chips, with lower footprint and higher inductance density compared from the conventional spiral inductor. Unlike prior works focusing on the inductor itself, this paper discusses the optimization and application of such TSV-inductor from system perspective, including the optimization options and its design considerations. The possible design options including physical parameters, architecture and materials, to optimize the TSV-inductor are thoroughly investigated. Based on that, we further study a few key design scenarios to evaluate the design impact with use of such TSV-inductor and provide the design guidelines for its application in actual system designs.

Research and Application of Thin-film Inductor

The Present Situation on the Research and Development of Thin-film Inductor

System-level Design Consideration and Optimization of Through-Silicon-via Inductor.

On the Efficacy of Through-Silicon-Via Inductors

The design and fabrication of LTCC chip inductors for high frequency applications based on barium ferrites

TSV inductor optimization and its design implication

&Amp;#x0022;green&#x0022; On-chip Inductors in Three-Dimensional Integrated Circuits

Through-silicon-via inductor: Is it real or just a fantasy?

Electrical Characterization of Integrated Passive Devices Using Thin Film Technology for 3D Integration

A Compact Circuit Model of On-Chip Multi-layer Spiral Inductors on Silicon Substrate

On-Chip Integrated Inductors with Ferrite Thin-Films for RF IC

On-Chip Integrated Inductors with Ni-Zn-Cu-Fe and Y-Bi-Fe Ferrite Thin-films for RF IC

The simulation study of high-performance micro-inductors Based on MEMS 3D coils

Micromachined Inductor Integrated with a Patterned Soft Magnetic Thin Film

Magnetic film inductors for RF IC

Design of Ultrathin Ltcc Coupled Inductors for Compact Dc/Dc Converters

Design and Simulation of On-Chip RF Magnetic Medium Inductors

Small-Resistance And High-Quality-Factor Magnetic Integrated Inductors On Pcb

Design And Simulation Of On-Chip Magnetic Inductors For Rf Ics

Design and Simulation of Si-Based MEMS Inductor

Design, Simulation, and Characterization of Variable Inductor with Electrostatic Actuation Fabricated by Using Surface Micromachining Technology