Abstract:The microstructures, mechanical properties, and ablation behaviors of carbon-fiber reinforced carbon and ZrC–SiC ceramic matrix composites (C/C–ZrC–SiC) fabricated through reactive melt infiltration were systematically researched, of which preforms were densified using different substrate carbon: (i) resin carbon (RdC) and (ii) pyrolitic carbon (PyC) for comparison. The results showed that the densification process with pores that differ in location and size dominated the distribution of ceramic phases within pristine carbon-fiber reinforced carbon (C/C). In addition, the C/C–ZrC–SiC samples with different carbon substrates possessed different mechanical properties. The flexural strength of the C/PyC-ZrC-SiC composites was significantly higher, exhibiting a ductile fracture behavior, which is different from that of the brittle fracture model in C/RdC-ZrC-SiC composites. However, after being exposed to an oxyacetylene ablation torch at 2500 °C for 30–240 s, the C/RdC-ZrC-SiC composites exhibited better ablation resistances because there were more carbon matrix and carbide blocks per unit volume in the composites, and the structure of C/RdC-ZrC-SiC possessed a shorter healing time for pores during ablation. In other words, an integrated oxide scale on the ablated surface can be formed in a relatively shorter time. Therefore, the superior ablation behavior can largely be ascribed to the formation of dense oxides containing molten-like SiO2, which could effectively resist scouring and seal the pores promptly during ablation.

Effect of C/C density on the properties of C/C-SiC-ZrC composites

Effects of Porous C/C Density on the Densification Behavior and Ablation Property of C/C–ZrC–SiC Composites

Ablation Properties of C/C-ZrC-SiC Composites

Microstructures and Ablation Properties of C/C−SiC−ZrC Composites Prepared Using C/C Skeletons with Various Densities

Ablation Properties of C/C-Zrc-Sic Composites by the Precursor Infiltration Pyrolysis

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites

Effect of ZrC Particle Distribution on the Ablation Resistance of C/C-SiC-ZrC Composites Fabricated Using Precursor Infiltration Pyrolysis

Effect Of Zrc Amount And Distribution On The Thermomechanical Properties Of C-F/Sic-Zrc Composites

Mechanical Properties and Ablation Behavior of C/C-ZrC and C/C-ZrC-SiC Composites Prepared by Precursor Infiltration and Pyrolysis Combined with Chemical Vapor Infiltration

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Effect of SiC/ZrC Ratio on the Mechanical and Ablation Properties of C/C–SiC–ZrC Composites

Microstructure and Ablation Property of C/C-ZrC-SiC Composites Fabricated by Chemical Liquid-Vapor Deposition Combined with Precursor Infiltration and Pyrolysis

Local Anti-Ablation Modification of Uneven-Density C/C Composites with the ZrC-SiC Composite Ceramics

Microstructure and Ablation Property of C/C-ZrC Composites Manufactured by Reactive Melt Infiltration

Effects of SiC Interphase on the Mechanical and Ablation Properties of C/C-ZrC-ZrB 2 -Sic Composites Prepared by Precursor Infiltration and Pyrolysis

Comparative Insights into C/C–ZrC–SiC Composites with Different Substrate Carbon on Microstructures, Mechanical Properties, and Ablation Behaviors

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Effects of ZrC/SiC Ratios on Mechanical and Ablation Behavior of C/C–ZrC–SiC Composites Prepared by Carbothermal Reaction of Hydrothermal Co-Deposited Oxides

Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties

Tuning Ceramic Content, Mechanical and Ablative Properties of C/C–ZrC-ZrxCuy Composites Via Using Various C/C Skeletons

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method