Abstract:To overcome the tradeoff between strength and ductility of materials and obtain titanium matrix composites with excellent mechanical properties, in this study, the in situ-synthesized TiC particles and Ti-Al-V-Mo-Cr (Ti1400) alloy-reinforced Ti6Al4V (TC4) matrix composites ((Ti1400 + TiC)/TC4) were fabricated by low-energy ball milling and spark plasma sintering. The inhomogeneous distribution of TiC particles and Ti1400 alloy, as well as the compositional and structural transition zone, were characterized. The TiC/TC4 composite displayed a significantly higher yield strength and tensile strength compared to the TC4 alloy. However, the total elongation of the TiC/TC4 composite was only 57% of that in the TC4 alloy. In contrast, the (Ti1400 + TiC)/TC4 composites exhibited noticeably higher total elongation than the TiC/TC4 composite. Furthermore, the tensile strength of the composite increased with the increase in Ti1400 alloy content. The increase in strength can be attributed to solid solution strengthening and fine grain strengthening. The compositional and structural transition zone, formed by element diffusion, provided a better interface combination between the reinforcements and TC4 matrix. In the transition zone and Ti1400 region, a large number of α/β interfaces can effectively alleviate the stress concentration, and the increase in the β phase can bear more plastic deformation, which is conducive to improving the elongation of the composite. As a result, the (Ti1400 + TiC)/TC4 composites exhibited simultaneous improvements in strength and ductility.

Microstructural heredity and controlling of strengthening particles in Fe(TiC)p composites fabricated by in-situ reaction

Microstructure, Mechanical Properties, and Sintering Behavior of Ti3O-Fe2TiO4-TiC Composites

Effects of Process Parameters on Microstructure and Properties of TiC Reinforced Cu-Matrix Composites

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites

The effect of carbon source and molar ratio in Fe–Ti–C system on the microstructure and mechanical properties of in situ TiC/Fe composites

Microstructural characterization and mechanical properties of (TiC+TiB)/TA15 composites prepared by an in-situ synthesis method

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Microstructure of In-Situ Synthesized (tib+tic)/ti Composites Prepared by Hot-pressing

Strength improvement and fracture mechanism in Fe40Al/TiC composites with high content of TiC

Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr 2 AlC-Ti system

Microstructure, mechanical properties and strengthening mechanism of in-situ synthesized TiC/6061 nanocomposites

In-situ Production and Microstructure of TiC/Fe_3Al Composites

Strengthening and toughening of Ti 5 Si 3 by TiC-coated short carbon fiber: Fabrication, interfacial control, and mechanism of reinforcement

Microstructure and Properties of TiCp/Fe Hierarchical Composites Prepared by a New Pressure Infiltration Method

In-Situ Synthesis, Microstructure, and Mechanical Properties of TiB2-Reinforced Fe-Cr-Mn-Al Steel Matrix Composites Prepared by Spark Plasma Sintering

Interfacial bonding and wear behavior of macroscopic TiC particulates reinforced iron-based composites fabricated by infiltration casting process

Microhardness and Microstructure of In-Situ Formed Fe-50%TiC Composites by Different Heating Methods

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Superior strength-ductility combination in TiC/TC4 composites via In situ construction Ti 2 Cu nanoparticles