Abstract:Proton exchange membrane electrolyzer cells (PEMECs) have received great attention for hydrogen/oxygen production due to their high efficiencies even at low-temperature operation. Because of the high cost of noble platinum-group metal (PGM) catalysts (Ir, Ru, Pt, etc.) that are widely used in water splitting, a PEMEC with low catalyst loadings and high catalyst utilizations is strongly desired for its wide commercialization. In this study, the ultrafast and multiscale hydrogen evolution reaction (HER) phenomena in an operating PEMEC is in-situ observed for the first time. The visualization results reveal that the HER and hydrogen bubble nucleation mainly occur on catalyst layers at the rim of the pores of the thin/tunable liquid/gas diffusion layers (TT-LGDLs). This indicates that the catalyst material of the conventional catalyst-coated membrane (CCM) that is located in the middle area of the LGDL pore is underutilized/inactive. Based on this discovery, a novel thin and tunable gas diffusion electrode (GDE) with a Pt catalyst thickness of 15 nm and a total thickness of about 25 µm has been proposed and developed by taking advantage of advanced micro/nano manufacturing. The novel thin GDEs are comprehensively characterized both ex-situ and in-situ, and exhibit excellent PEMEC performance. More importantly, they achieve catalyst mass activity of up to 58 times higher than conventional CCM at 1.6 V under the operating conditions of 80 °C and 1 atm. This study demonstrates a promising concept for PEMEC electrode development, and provides a direction of future catalyst designs and fabrications for electrochemical devices.

Preparing PEMFC Electrodes by Ultrasonic-Spray Technique

Fabrication of High-Performance Gas Diffusion Electrode Via Microporous Layer Surface Morphology Control

Preparation of Membrane Electrode Assemblies for Proton Exchange Membrane Fuel Cells

Electrostatic Spraying of Membrane Electrode for Proton Exchange Membrane Fuel Cell

Performance Optimization of Ultra-Low Platinum Loading Membrane Electrode Assembly Prepared by Electrostatic Spraying

Preparation of Pt nanowires as cathode catalyst for PEMFC and its application in stack

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

Catalyst electrode based on in-situ grown Pt nanowires

Optimizing the Mass-Transfer Efficiency of a Microporous Layer for High-Performance Proton Exchange Membrane Fuel Cells

In situ grown nanoscale platinum on carbon powder as catalyst layer in proton exchange membrane fuel cells (PEMFCs)

Investigation of a Novel Catalyst Coated Membrane Method to Prepare Low-Platinum-Loading Membrane Electrode Assemblies for PEMFCs

A Study on Novel Pulse Preparation and Electrocatalytic Activities of Pt/C-Nafion Electrodes for Proton Exchange Membrane Fuel Cell

Effect of gas diffusion layer surface property on platinum nanowire array electrode performance in proton exchange membrane fuel cells

Design of Pt/Carbon Xerogel Catalysts for PEM Fuel Cells

Preparation of Oxygen Reduction Catalyst Electrodes by Electrochemical Acidification and Synergistic Electrodeposition

Performance of Proton Exchange Membrane Fuel Cell Electrodes Prepared by Direct Deposition of Ultrathin Platinum on the Membrane Surface

High Performance Polymer Electrolyte Membrane Fuel Cells (pemfcs) with Gradient Pt Nanowire Cathodes Prepared by Decal Transfer Method

Membrane Electrode Assembly with Ultra Low Platinum Loading for Cathode Electrode of PEM Fuel Cell by Using Sputter Deposition

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

Incorporating ALD Based Pt Alloy Catalysts into Gas Diffusion Electrodes for Proton Exchange Membrane Fuel Cells

A High-Performance PEM Fuel Cell with Ultralow Platinum Electrode Via Electrospinning and Underpotential Deposition