Abstract:Over the past several decades, planar proton exchange membrane fuel cells (PEMFCs) received considerable attention due to their simple structure, manufacturing, and easy integration. However, current PEMFC electrode designs are disadvantaged by high cost, insufficient mass transport, nonuniform reactant, current and temperature distribution, and limited water removal. The development of a novel tubular fuel cell design could address these challenges. Tubular-shaped PEMFC offers several advantages over planar one, including lower pressure drop, efficient water removal, reduced mass transport losses, and cost reduction owing to removing one of gas diffusion layer/bipolar plate (GDL/BPP) side. This work developed a carbon nanofiber (CNF)/Pt-based cathode for a tubular fuel cell. The tubular CNF support for Pt catalyst was fabricated employing the electrospinning method. Polyacrylonitrile (PAN) was used as the precursor. The electroless deposition of Pt using the chloroplatinic acid solutions was applied to produce well-dispersed low Pt loading nanowires. The tubular CNF/Pt electrodes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), ex-situ cyclic voltammetry to determine the CF and Pt morphology and feasibility of the prepared layer in PEMFC application. SEM images indicated that increasing the Pt precursor concentration in the plating bath leads to higher Pt loading and larger Pt clusters on the CNF surface. The calculated electrochemical active surface area (ECSA) trend imparts that high Pt loading is less favorable as thick Pt layers lead to low Pt utilization and increased material costs. ECSA results agreed with SEM images, suggesting that the medium Pt concentration (1.5 g L -1 Pt precursor) developed a homogenous Pt distribution and comparable Pt surface area of 24 m 2 g Pt -1 for the Pt loading of 0.046 mg cm -2 , proving the feasibility of the proposed process.

Membrane Electrode Assembly with Ultra Low Platinum Loading for Cathode Electrode of PEM Fuel Cell by Using Sputter Deposition

High Performance PEM Fuel Cell with Low Platinum Loading at the Cathode Using Magnetron Sputter Deposition

Performance of Proton Exchange Membrane Fuel Cell Electrodes Prepared by Direct Deposition of Ultrathin Platinum on the Membrane Surface

High-performance anode for Polymer Electrolyte Membrane Fuel Cells by multiple-layer Pt sputter deposition

Towards Ultralow Platinum Loading Proton Exchange Membrane Fuel Cells

Ultra-low Pt loading catalyst layers prepared by pulse electrochemical deposition for PEM fuel cells

Nano-engineering of a 3D-ordered membrane electrode assembly with ultrathin Pt skin on open-walled PdCo nanotube arrays for fuel cells

Improving Pt Utilization and Electrochemical Activity of Proton Exchange Membrane Fuel Cells Through Surface Modification of Carbon Nanotube Catalyst Support

Constructing Membrane Electrodes of Low Pt Areal Loading with the New Support of N-doped Carbon Nanocages for PEMFC

Effective single web-structured electrode for high membrane electrode assembly performance in polymer electrolyte membrane fuel cell

Enhanced Catalytic Properties from Platinum Nanodots Covered Carbon Nanotubes for Proton-Exchange Membrane Fuel Cells

Asymmetric Pt nanoparticles with high lattice strain grown onto 3D graphene film as efficient integrated catalyst layer for proton exchange membrane fuel cells

Numerical Study of Sputter Deposited Ultra-Low Loaded Effective Platinum Electrocatalyst Utilization in Proton Exchange Membrane Fuel Cell

Ultrathin Nanoporous Metal Electrodes Facilitate High Proton Conduction for Low-Pt PEMFCs

A Study on Novel Pulse Preparation and Electrocatalytic Activities of Pt/C-Nafion Electrodes for Proton Exchange Membrane Fuel Cell

Patchy Fe-N-C Supported Low-Loading Pt Nanoparticles As a Highly Active Cathode for Proton Exchange Membrane Fuel Cells

A Highly Order‐Structured Membrane Electrode Assembly with Vertically Aligned Carbon Nanotubes for Ultra‐Low Pt Loading PEM Fuel Cells

A High-Performance PEM Fuel Cell with Ultralow Platinum Electrode Via Electrospinning and Underpotential Deposition

A Highly Ordered Hydrophilic–Hydrophobic Janus Bi‐Functional Layer with Ultralow Pt Loading and Fast Gas/Water Transport for Fuel Cells

Fabrication and Performance Evaluation of Tubular Catalyst Layer for Proton Exchange Membrane Fuel Cell

Preparation of Oxygen Reduction Catalyst Electrodes by Electrochemical Acidification and Synergistic Electrodeposition