Abstract:Abrasive water jet polishing has significant advantages in the manufacturing of complex optical components (such as high-slope optical component cavities) that require high-precision manufacturing. This is due to its processing process, in which the polishing tool does not make direct contact with the surface of the workpiece, and instead maintains a considerable distance. However, the removal functions of most existing abrasive water-jet polishing technologies do not possess strict symmetry, which significantly impacts the ability to correct surface figure errors. Therefore, this study implements rotating abrasive water-jet polishing based on traditional abrasive water jet processing to optimize the removal function, which turns it into a Gaussian form; thus, obtaining a type of removal function more suitable for CCOS polishing. This paper derives an empirical formula between the distance s' from the peak removal point of the removal function to the stagnation point and the nozzle tilt angle α, based on geometric relationships and experimental results, analyzes the relationship between material removal efficiency, nozzle tilt angle, and standoff distance. Finally, this paper verifies through experiments the validity of this empirical formula under different process parameters. Therefore, this study obtains the process conditions that allow rotating abrasive water-jet polishing technology to achieve a stable Gaussian form removal function, and the appropriate process parameters to be selected in conjunction with polishing efficiency; thereby, effectively improving the removal function's corrective ability and manufacturing efficiency. It provides theoretical support for the processing capability and process parameter selection of abrasive water-jet polishing technology, solves the problem of limited shaping capability of existing abrasive water jet tools, and significantly improves the manufacturing capability of high-end optical components.

Controlling and Optimization of the Honing Trajectory

Free-floating dynamic material removal mechanism of the honing process

Analysis of Material Removal in Alumina Ceramic Honing

Multi-objective Optimization of Micron-Scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps

Numerical analysis and experimental validation of surface roughness and morphology in honing of Inconel 718 nickel-based superalloy

Simulation to Microtopography Formation of CBN Active Abrasives on a Honing Wheel Surface

Investigation on the Radial Micro-Motion about Piston of Axial Piston Pump

Control Strategy of Crankshaft Tangential Point Tracing Grinding and Error Analysis

Mutual influence of plateau roughness and groove texture of honed surface on frictional performance of piston ring–liner system

Simulation and experimental investigation on low wear rate surface contour of piston/cylinder pair in an axial piston pump

Effects of the Piston Skirt's Surface Structure on Coating Quality and Friction Functions

Optimization of Groove Texture Profile to Improve Hydrodynamic Lubrication Performance: Theory and Experiments

Investigation on formation mechanism of surface texture and modeling of surface roughness with internal gear power honing

Model of Surface Texture for Honed Gear Considering Motion Path and Geometrical Shape of Abrasive Particle

Kinematics modeling and trajectory optimization for precision grinding of variable-parameter helical grooves

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions

Optimization of the Morphology of the Removal Function for Rotating Abrasive Water Jet Polishing

Occlusion failure analysis and optimization design for steel piston pin hole-pin friction pair

Design and Optimization of the Surface Texture at the Hydrostatic Bearing and the Spindle for High Precision Machining

Optimization of surface texture distribution on the thrust bearing using the mass-conserving cavitation boundary condition: Theory and experiments

Influence of Different Surface Texture Parameters on the Contact Performance of Piston Ring-Sleeve Friction Pair of Hydraulic Cylinders