A novel wear prediction method and wear characteristic analysis of piston/cylinder pair in axial piston pump
Yu Lin,Hujiang Wang,Honggang Wang,Shousheng Tang,Huimin Hao,Jiahai Huang
DOI: https://doi.org/10.1016/j.wear.2024.205402
IF: 4.695
2024-05-24
Wear
Abstract:The wear of the piston/cylinder pair in the axial piston pump is a significant factor that adversely affects pump performance. To conduct a thorough investigation into the wear characteristics of the piston/cylinder pair, a dynamic model based on the equivalent load method is established. Then, a novel wear prediction method for the piston/cylinder pair is proposed by integrating the Archard wear model. The validity of the proposed method is confirmed through experimental verification. The results demonstrate that specific circumferential areas of the cylinder bore exhibit severe wear, and the distribution of these areas remains relatively stable over time. At the swash plate side, the most severe wear area along the circumference direction is concentrated in the range of approximately 200°–320°, which means the area that deviates from the extreme position in the radial direction of the pitch circle by a specific angle, with the deviation direction being opposite to the rotational speed. Conversely, at the valve plate side, the most severely worn circumferential area is situated in the range of about 0°–120°, which is opposite to the area at the swash plate side. The proposed wear prediction method offers improved computational efficiency, providing valuable support for analyzing the wear characteristics and failure mechanisms of piston pumps.
engineering, mechanical,materials science, multidisciplinary