Abstract:The main objective of the present work is to introduce a specific experimental instrument and technique for simultaneously evaluating cooling curves and expansion or contraction of cast metals during solidification. Contraction/expansion analysis illustrates the solidification parameters progression, according to the molten cast iron characteristics, which are dependent on the melting procedure and applied metallurgical treatments, mold media rigidity and thermal behavior [heat transfer parameters]. The first part of the paper summarizes the performance of this two-mold device. Its function is illustrated by representative shrinkage tendency results in ductile cast iron as affected by mold rigidity (green sand and furan resin sand molds) and inoculant type (FeSi-based alloys), published in part previously. The second part of the paper illustrates an application of this equipment adapted for commercial foundry use. It conducts thermal analysis and volume change measurements in a single ceramic cup so that mold media as well as solidification conditions are constants, with cast iron quality as the variable. Experiments compared gray and ductile cast iron solidification patterns. Gray iron castings are characterized by higher undercooling at the beginning and at the end of solidification and lower graphitic expansion. Typically, ductile cast iron exhibits higher graphitic, initial expansion, conducive for shrinkage formation in soft molds.

A Method on Computer Prediction of Shrinkage Defect of Ductile Iron Casting by EPC Process

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process

PREDICTION OF SHRINKAGE CAVITY AND POROSITY IN GRAY CAST IRON DURING SOLIDIFICATION

A mathematical model for predicting shrinkage defect of ductile iron castings

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Computer-Aided Engineering (CAE) Simulation for the Robust Gating System Design: Improved Process for Investment Casting Defects of 316L Stainless Steel Valve Housing

Modeling of Shrinkage Cavity Formation and Proces s Improvement of S.G.Iron Hub Casting

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Numerical and Experimental Study of the Elimination of Shrinkage in Complex and Small Investment Castings Using Water Cooling Process

Criteria for Prediction of Shrinkage Cavities and Porosity in Castings

Optimization of V-Process for Cast-Iron Boiler Plate

Study of solidification shrinkage of ductile iron in dry sand molds

The Evolution of Researching the Cockle Defect for Iron Castings on EPC

Research and Application of Foundry CAD/CAE System

Prediction of Shrinkage Defects in a Third Class Moving Turbine Blade by Invested Casting

Integrated System of Thermal/Dimensional Analysis for Quality Control of Metallic Melt and Ductile Iron Casting Solidification

Shrinkage Behaviour of Spheroidal Graphite Cast Iron in Green and Dry Sand Molds for the Benchmarking of Solidification Simulation

Studies on formation of shrinkage cavity and porosity of steel castings by taking filling process into account

Dimensional Shrinkage Prediction Based on Displacement Field in Investment Casting

Numerical Simulation of Vacuum Investment Casting Cartridge Receiver