Abstract:In this work, a novel internal heat absorption technology using inorganic material rods is employed during the solidification process of steel ingots, aiming to control their solidification and improve the quality of the final product. The study investigates the effect of the insertion depth of inorganic materials on the solidification microstructure and macrosegregation of 2.5-ton 42CrMo ingots. The mechanical properties of samples from the product are also tested. A numerical simulation model for casting 2.5-ton ingots is established and implemented in Ansys Fluent fluid simulation software, with inorganic material rods set at different preset depths. The simulation explores the physical processes of the melting and floating of inorganic materials in molten steel, as well as their effects on the temperature and flow fields of the material. The results show that deeper insertion of inorganic materials (200 mm from the hot top) reduces the tendency for macrosegregation compared to that at the insertion depth of 100 mm. Specifically, the positive segregation area decreases by 10.35%, while the negative segregation area decreases by 15.32%. Moreover, deeper insertion results in a significant refinement of the solidification microstructure, ultimately enhancing the mechanical properties of the products machined from the ingots (i.e., the yield strength increased by 4.7%). The numerical simulation results indicate that as the placement depth of inorganic materials in the ingot mold increases, the cooling effect becomes more significant, the flow area of molten steel initiated by the inorganic materials expands, and the linear velocity of the double-circle flow increases. This further explains why the solidification quality of the ingots improves with the increasing placement depth of inorganic materials.

Study of solidification shrinkage of ductile iron in dry sand molds

Shrinkage Behaviour of Spheroidal Graphite Cast Iron in Green and Dry Sand Molds for the Benchmarking of Solidification Simulation

PREDICTION OF SHRINKAGE CAVITY AND POROSITY IN GRAY CAST IRON DURING SOLIDIFICATION

Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts

Integrated System of Thermal/Dimensional Analysis for Quality Control of Metallic Melt and Ductile Iron Casting Solidification

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

A mathematical model for predicting shrinkage defect of ductile iron castings

Numerical research of gas-related defects for gray cast iron during sand casting

Microstructure evolution of heavy section ductile iron

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

A Method on Computer Prediction of Shrinkage Defect of Ductile Iron Casting by EPC Process

Numerical and Experimental Study of the Elimination of Shrinkage in Complex and Small Investment Castings Using Water Cooling Process

Progress in Solidification Modeling of Cast Iron in China

The Relation between Limited Feeding and Shortening Shrinkage Time on Iron Casting Surface

Studies on formation of shrinkage cavity and porosity of steel castings by taking filling process into account

Study on Thermal Simulation of Solidification in Heavy Section Ductile Iron

The Effects of MgFeSi and Inoculant Selection on Microstructure and Mechanical Properties of Varying Section Size Ductile Iron Castings

Study on numerical simulation of mold-filling and solidification processes of shaped casting

Determination and Application of Thermophysical Properties of Heavy Steel Casting for Solidification Simulation

The Influence of Insertion Depth of Inorganic Materials on Solidification Microstructure and Segregation of 2.5-ton 42CrMo Ingot