Abstract:We elucidate the effect of nano-SiC whisker (SiC w ) on the microstructure and mechanical properties of Ti6Al4V alloy manufactured by selective laser melting (SLM). The transformation of cross-sectional plate-like α grains and longitudinal-sectional β columnar grains to equiaxed grains could be achieved by adding a trace amount of SiC w , and the weak texture strength microstructure with fine equiaxed grains was obtained. The in situ formed nanosized TiC particles promoted grain refinement through three mechanisms: (i) The diffusion distribution of nanosized TiC particles provided a favorable nucleation position for the α phase, it also limited the growth of the α phase. (ii) Nanosized TiC particles were dispersed to fix dislocations and grain boundaries, inhibit the grain growth. (iii) Nanosized TiC was embedded in the matrix and bound well to the matrix. The Ti matrix was easy to nucleate on some specific crystal planes of primary TiC, which increased the nucleation rate. In addition, the addition of SiC w significantly improved the mechanical properties of Ti6Al4V alloy, compared with that of the Ti6Al4V alloy (360.2 HV), the microhardness of the sample with 1.0-wt% SiC w (522.7 HV) increased by 45.1%. The addition of 0.5-wt% SiC w (1445.34 MPa) increased the ultimate tensile strength by 19.4% compared with that of the Ti6Al4V alloy (1210.13 MPa), and good ductility was maintained. The results show that the microstructure of Ti6Al4V alloy can be significantly improved by adding a trace amount of SiC w , which provided an effective way for the grain refinement of titanium matrix composites manufactured by SLM.

Fabrication of SiCW/Al Composites with Low Whisker Volume Fraction

Forming process of hot-extruded SiCw/6061AI composites(I)

MICROSTRUCTURES AND PROPERTIES OF HOT-EXTRUDED SiCW/6061Al COMPOSITES

Fabrication and mechanical properties of α-Al2O3 whisker reinforced cu-graphite matrix composites

Roles of orientation relationship and recrystallization in superplasticity of SiCw/6061Al composite

Preparation and mechanical properties of SiC whisker-reinforced alumina

Microstructure control of SiCw/SiC composites based on SLS technology

Silicon Nitride Whisker-Reinforced Aluminum Matrix Composites: Twinning and Precipitation Behavior

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Mechanical and Tribological Properties of SiC Whisker‐reinforced SiC Composites Via Oscillatory Pressure Sintering

Improved Sinterability of SiC(w)/Si3N4 Composites by Whisker-Oriented Alignment

High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis

Mechanical Properties and Microstructure of Calcium Sulfate Whisker-Reinforced Cement-Based Composites

Mechanical and tribological properties of SiC whiskers reinforced SiC composites via oscillatory pressure sintering

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

The effect of whisker orientation in SiC whisker-reinforced Si3N4 ceramic matrix composites

Untrasonic-Assisted Fabrication of SiC Nanoparticles Reinforced Aluminum Matrix Composites

Binder jetting additive manufacturing of hierarchical structural SiC w /SiC composites

Nano-SiC whisker-reinforced Ti6Al4V matrix composites manufactured by selective laser melting: fine equiaxed grain formation mechanism and mechanical properties

The Dual Effect Of Whiskers On Toughening And Conducting Properties In Aligned Sic Whisker-Reinforced Si3n4-Matrix Composites

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration