Abstract:Since the 1960s, it has been a common practice worldwide to pursue a homogeneous distribution of reinforcements within a matrix material, discontinuous metal matrix composites (DMMCs) in particular. Taking an overview of the worldwide activities in DMMC research, despite many favourable attributes such as improved specific strength, stiffness and superior wear resistance, DMMCs with a homogeneous microstructure tend to exhibit a very low room temperature damage tolerance even with a highly ductile matrix material such as aluminium. In this review, a range of uniquely multi-scale hierarchical structures have been successfully designed and fabricated by tailoring reinforcement distribution for DMMCs in order to obtain superior performance. A variety of specific microstructures that were developed in Al, Mg, Cu, Fe, Co and TiAl matrices indicate that there must be adequate plastic regions among the reinforcements to blunt or deflect cracks if one wants to toughen DMMCs. Following this path, aided by theoretical analyses, the most recent success is the design and fabrication of a network distribution of in situ reinforcing TiB whiskers (TiBw) in titanium matrix composites (TMCs), where a tailored three-dimensional (3D) quasi-continuous network microstructure displays significant improvements in mechanical properties. This resolves the brittleness surrounding TMCs fabricated by powder metallurgy. It is the large reinforcement-lean regions that remarkably improve the composite’s ductility by bearing strain, blunting the crack and decreasing the crack-propagation rate. The fracture, strengthening and toughening mechanisms are comprehensively elucidated in order to further understand the advantages of such an inhomogeneous microstructure, and to justify the development of novel techniques to produce such inhomogeneous microstructures. This approach opens up a new horizon of research and applications of DMMCs and can be easily extended to general multi-phase composites with enhanced physical and mechanical properties.

High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

Synergistic reinforcement effect of Fe and in-situ synthesized MgAlB4 whiskers in Al matrix composites

Microstructure evolution and tensile behavior of MgAlB4w/Al composites at high temperatures

Silicon Nitride Whisker-Reinforced Aluminum Matrix Composites: Twinning and Precipitation Behavior

Fabrication and mechanical properties of α-Al2O3 whisker reinforced cu-graphite matrix composites

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Enhanced ductility of Ti3AlC2 particles reinforced pure aluminum composites by interface control

Acquiring Mg-Ag microalloying TiB 2 /Al-4.5Cu composite simultaneously with ultrahigh strength and ductility via optimized salt-metal reaction and multistage heat treatment

Effect of whisker alignment on microstructure, mechanical and thermal properties of Mg-SiC w /Cu composite fabricated by a combination of casting and severe plastic deformation (SPD)

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Mechanical Properties of Silicon Carbide Whisker-Reinforced Silicon Nitride Matrix Composites

Microstructural characteristic and mechanical properties of the in-situ MgAl2O4 reinforced Al matrix composite based on Al-Mg-ZnO system

Simultaneously improving strength and ductility of hybrid Al–Si matrix composite with polyphasic and multi-scale ceramic particles

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy

In-situ solid-state deformation-driven rapid reaction towards higher strength-ductility Al-CuO composites

Gaining strength-ductility combination in Al matrix composites with in-situ synthesized three-dimensional nanocarbon network

Preparation and mechanical properties of SiC whisker-reinforced alumina