Sheet Laser Forming & Research Progress

刘韧,季忠,张鹏,贾玉玺

DOI: https://doi.org/10.3969/j.issn.1672-0121.2004.03.012

2004-01-01

Abstract:History,present research and development tendency of sheet laser forming technique have been introduced in sectors such as research of theory and experiments and numerical simulation.

What problem does this paper attempt to address?

Process and Development of Laser Forming

CHEN Dun-jun,XIANG Yi-bin,WU Shi-chun,LI Miao-quan

DOI: https://doi.org/10.3969/j.issn.1001-3814.2000.03.022

2000-01-01

Abstract:Process characteristics and four differenttypes of methods which include sheet bending towards the laser beam,sheet bending away from the laser beam,rod bending and space deformation are introduced.The different forming mechanisms and possible applying fields are stated.The development prospect of laser forming is forecast.
The Characteristic and Application of Laser Forming Technology

Gang Fang

DOI: https://doi.org/10.3969/j.issn.1000-372X.2001.02.010

2001-01-01

Abstract:In this paper, firstly, the technology characteristics of laser forming are introduced,and authors study principles and mechanism of laser forming,as well as some technology parameters contributed to forming quality. At last ,the present state and perspectives of domestic and foreign research on laser forming are introduced
Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

王飞,姚振强

2007-01-01

Journal of Shanghai Jiaotong University (Science)

Abstract:Laser shock forming (LSF) of sheet metal is a new technique realized by applying an impulsive pressure generated by laser-induced shock wave on the surface of metal sheet. LSF of brass sheet metal was investigated using a Q-switched Nd:YAG laser with an energy per pulse of 15～50 joules. ABAQUS software was used to simulate laser shock forming process. The central displacement of the shocked region is measured and compared with the simulation. The higher pulse energy, the higher central displacement of the shocked region were obtained. The deformation of the simulation matches the experiment quite well.
Numerical Simulation Research on Laser Shock Forming

WANG Fei,YAO Zhen-qiang

DOI: https://doi.org/10.3321/j.issn:1006-2467.2006.09.002

2006-01-01

Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University

Abstract:The laser shock forming was investigated with experimental and numerical simulation. The surface shape and deformation of the processed brass sample are examined and analyzed. ABAQUS is used to simulate laser shock forming. The results show the surface quality and the microstructure have no remarkable change; the biggest displacement of the shocked area is 0.991 mm, and the deformation of the simulation agrees with the experiment quite well.
Research on Full Procedure Simulation of Sheet Laser Forming

JIN Xiong,YAO Zhen-qiang

DOI: https://doi.org/10.3321/j.issn:1006-2467.2008.01.020

2008-01-01

Abstract:In order to realize the simulation of thermal forming for the total procedure for complex surfaces in short time,this paper described the fundamental characteristics and the processing properties for laser forming of metal sheets,and also suggested the geometrical parameter method by means of which the formed surface can be quickly created.It also presented the mathematical model according to which the surface-geometrical method is combined with measuring and/or numerical data concerning to a local irradiation,and numerical simulations are carried out.The simulation results show that this method is feasible,and possible to much reduction of the simulation time,therefore this method and simulation software provides the application basis for the real time supporting of the on-line procedure.
RECENT DEVELOPMENT IN LASER MATERIALS PROCESSING

Y. Lawrence Yao,Wayne Li,Kai Chen

2000-01-01

Abstract:Recent research and development in laser machining and laser forming processes is reviewed. In the laser machining area, striation formation and prediction, and gas jet - workpiece interactions are discussed. In the laser forming area, strain rate effects, and convex forming are presented.
Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

Lj Yang,Y Wang,Xn Jin,Lt Qi,Sj Lv

2004-01-01

Abstract:Laser forming has become a viable process for the shaping of metallic and non-metallic sheet components, as a means of rapid prototyping and of adjusting and aligning. In order to advance the laser forming process further for practical application in industry, the research of laser forming was performed on common stainless steel 1Cr18Ni9Ti sheet with a Nd:YAG laser source in this paper. In order to obtain convergent and highly accurate results in a reasonable time, a rezoning technique for laser heat flow density is used to adapt the mesh in the FEM simulations of low-velocity laser forming process, single pulse jump light source is applied in place of continuous scan of laser beam. It includes the empirical investigations to determine processing parameters using the temperature gradient mechanism to form different angles with simple straight line laser scanning. The simulation results of temperature field and deformation field of laser forming of metal sheets accord with the experimental results, which showed that the bending angle increases approximately linearly as the scanning times increase. And the bending angle firstly increases with the laser power increasing and begins to decrease at a certain processing parameters, as there is a certain power parameter resulting in a maximum bending angle for a certain material and parameters. The bending angle increases as the laser beam diameter increase and begins to decrease at a certain processing parameters, as a maximum bending angle is acquired when the beam diameter is the same as the thickness of the metal sheet. Bigger sheet thickness leads to smaller bending angles, and thickness is the most important influencing factor of bending angles. The bending angle increases with the sheet width, but there is a width limit bigger than which the sheet width has little influence on bending angles.
Study on Laser Sine Forming of Sheet Metals

ZHANG Peng,GAO Hongliang,CHU Guannan

DOI: https://doi.org/10.3969/j.issn.1005-2402.2007.03.010

2007-01-01

Abstract:Laser forming is a highly flexible sheet metal forming technique. It's important to investigate the relationship between the distortion and process route. In this paper, the FEM is used to simulate the laser sine forming of sheet metal. The results show that the peak temperature values of laser sine scanning rise more rapidly with the same processing parameters. The shape and size of the distortional area are related to the scanning path. A circinal zone with large radius can represent the heated area of sheet. The warped phenomenon is mitigated when the chordal height decreases.
Research Progress in Laser Direct Metal Rapid Prototyping Technology

ZHANG An-feng,LI Di-chen,LU Bing-heng

DOI: https://doi.org/10.3969/j.issn.1004-244x.2007.05.020

2007-01-01

Abstract:The laser direct metal rapid prototyping technology is not only the integration of rapid forming basic principles and laser processing technology, but also the inevitable trend of research and development of rapid shaping field. This paper introduces 5 kinds of foreign and 3 kinds of domestic latest research of laser direct metal rapid shaping technology systematically, and analyses the characteristics of these types of laser direct metal rapid shaping technology, and points out the existing problems and the future major research directions of the laser direct metal rapid shaping technology. Research shows that the direct laser cladding metal parts with rapid prototyping technology have unmatched advantage over conventional manufacturing methods. In the aerospace, energy and power engineering, mechanical and electrical engineering, instrumentation, military weapons, equipment, and medical fields,the technology has the broad application prospects.
Research on Procedure Simulation of Sheet Laser Forming on the Basis of Geometrical Parameter Method

JIN Xiong,YAO Zhen-qiang

DOI: https://doi.org/10.3969/j.issn.1006-2343.2007.04.025

2007-01-01

Abstract:This paper suggests the geometrical parameter method for laser forming of sheet metal,by means of which the formed surface can be quickly created.The simulation for the full laser forming process is presented and has been realized on the basis of the geometrical parameter method.In this paper,the methods for designing the process pi- an and its control have been also ikkustroted.The simulation results have proved the effectiveness of the method and the applicability of the full process of the sheet metal laser forming.
Preliminary Studies on Strain Rate Dependence of Laser Shock Forming

ZHOU Guo-xiang,WANG Fei,YAO Zhen-qiang

DOI: https://doi.org/10.3321/j.issn:1006-2467.2009.07.024

2009-01-01

Abstract:The effect of rate dependence on laser shock forming(LSF) was investigated with experimental and numerical simulation.The displacement field of the treated brass and stainless steel specimens was examined and analyzed.ABAQUS was used to simulate LSF.The results show the maximum displacements of the brass and metal sheets are 0.462 mm and 0.076 mm respectively.For the rate dependent material,the deformation of the simulation matches the experimental results quite well if the rate dependence is considered.This research has laid foundation for the wide application of the LSF technology.
Simulation and experimental research on spherical dome by 3D laser forming of square sheet

Lijun Yang,Yang Wang

DOI: https://doi.org/10.1117/12.725737

2007-01-01

Abstract:Laser forming is a technique of using the energy from a laser beam to modify and adjust the curvature of sheet metals or hard materials. 2-dimensional laser forming can reasonably accurately control bend angles with various materials. To advance this process further for realistic forming applications in a manufacturing industry, it is necessary to consider larger scale controlled 3-dimensional laser forming. However, this is a different situation for 3-dimensional laser forming. The work presented in this paper uses the spider scanning path to form the thin square sheet to spherical dome by laser forming. The explicit dynamic analysis on 3-dimentional laser forming is shown in the article. On the base of temperature gradient mechanism of 2-dimensional laser forming, depending on the geometry and the thermo-physical properties of stainless steel 1Cr18Ni9Ti, develop the mechanism of laser forming of thin square sheet to the spherical dome. This paper discusses the interaction between moving laser beam and sheet, the temperature field on the sheet, and the step transition of stress and deformation in laser forming. In order to give the verification on the results of simulation, the correlative experiment has progressed with Lumonics JK702H Nd:YAG laser. The results of experiments are in accord with the simulation.
Research On The Characteristics Of Metal Sheet With Pulse Laser Forming

L. J. Yang,H. Jin,Y. Wang,M. L. Wang

2006-01-01

Abstract:Laser forming of metal sheet is a forming technology of sheet without a die that the sheet is deformed by internal thermal stress induced by partially irradiation of a laser beam. In this paper, the bending behavior of common stainless steel 1Cr18Ni9 sheet is studied after being irradiated by straight line with a Nd:YAG pulse laser beam. The aim of the investigation is to find out the relationship of the bending angles and physical behaviors with the pulse parameters of the laser. The experimental results show that the pulse energy is the most important influencing factor which influences the bending angles in pulse laser forming of metal sheet in the pulse parameters. The microstructures show that the deformed grain structure is inhomogeneous, that caused the formation of the grain sizes and grain orientations are different in heat-affected zones. But the results of the X-ray diffraction analysis show that the contents of elements have little change between the irradiated zones and raw materials. And the hardness of irradiated zones is increasing in comparison to the initial raw hardness. By qualitative analysis of experimental result, the conclusion obtained may provide basis for theoretical investigation and possible industrial application of laser bending process in the future.
Research Status on Closed-loop Control Technique of Laser Forming

WANG Jiaan,WANG Huimin,GAO Peng,ZHANG Pen

DOI: https://doi.org/10.3969/j.issn.1672-0121.2008.02.008

2008-01-01

Abstract:The laser forming process and influencing factors have been analyzed.The stability and reliability of forming process can be guaranteed by closed-loop control,which can easily obtain the optimal processing parameters subject to quality constraints.Both the precise forming of net shape laser and intelligence in process can be achieved by using the closed-loop system.
Theoretical and Experimental Study on Laser Compound Forming of Plate

Shu Huang,Jianzhong Zhou,Yibin Chen,Yueqing Sun,Jianjun Du

DOI: https://doi.org/10.4028/www.scientific.net/kem.375-376.343

2008-01-01

Key Engineering Materials

Abstract:An emerging process named laser compound forming of plate was presented by analyzing the advantages of laser thermal-stress forming (LTF) and laser peen forming (LPF) respectively. This technique combined the heat effect of continuous laser and mechanical effect of pulsed laser. Based on introducing the process of laser pre-stressed compound peen forming, the mechanism of plastic deformation and residual stress were analyzed. In order to apply pre-stressed load, a CO2 laser was used to scan SUS304 stainless plate according to the designed tracks firstly, the basic shape were formed and the contours of plate’s surface were measured by the optical scan measuring system, reverse engineering software Imageware was used to establish the virtual models of plate. Then the virtual models were inverted into finite element models by FEM code ABAQUS. The optimum distribution of residual stress field was obtained by adjusting laser parameters and controlling tracks of LPF. Finally, the optimized laser parameters and processing condition were used for LPF experiment. The results indicated that the anticipated shape could be obtained, and both side of the plate hold residual compressive stress after laser compound forming.
Experimental Research on Pulse Laser Forming of Metal Sheet

Y Wang,LJ Yang,D Mokhtar,WS Zhao,LT Qi

DOI: https://doi.org/10.1117/12.575744

2005-01-01

Abstract:Laser forming of sheet is a forming technology of sheet without a die that the sheet is deformed by internal thermal stress induced by partially irradiation of a laser beam. In this paper, the bending behavior of common stainless steel 1Cr18Ni9Ti sheet is studied after being irradiated by straight line with a Nd:YAG pulse laser beam. The aim of the investigation is to find out the relationship of the bending angles with the pulse parameters of the laser. The experimental results show that higher width of pulse is advantageous to increase the bending angles if the total outer power and the rate of the pulse are constant. The bending angle increases as the rate of the pulse increase and begins to decrease at a certain processing parameters. And the bending angle firstly increases with the pulse energy increasing and begins to decrease at a certain processing parameters, as there is a certain pulse energy parameter resulting in a maximum bending angle for a certain material and processing parameters. The pulse energy is the most important factor influences the bending angles of pulse laser forming in the pulse parameters. By qualitative analysis of experimental result, the conclusion obtained may provide basis for theoretical investigation and possible industrial application of laser bending process in the future.
Research Status and Development Trend of Laser Additive Manufacturing Technology

Huang Yingzhou,Zhu Weinan,Han Hongsong,Song Chenguang,Wu Guoqing

DOI: https://doi.org/10.1109/ICISCE.2017.251

2017-07-01

Abstract:Laser additive manufacturing (LAM) technology is one of the most representative of advanced manufacturing technology, and one of the most critical technology, is currently a hot research at home and abroad. This paper mainly introduces the forming principle, characteristics and research status of two typical LAM technologies--selective laser melting (SLM) technology and laser cladding deposition (LCD) technology. Moreover, some application examples of LAM technology are listed, and its future development trend is discussed.

Materials Science,Engineering
Study on mechanical properties after laser forming

Hong Shen,Zhenqiang Yao

DOI: https://doi.org/10.1016/j.optlaseng.2008.07.010

IF: 5.666

2009-01-01

Optics and Lasers in Engineering

Abstract:Laser forming is a means of processing materials in a novel manner. The mechanical properties of specimens after laser forming are investigated. By tension tests, the tension properties are analyzed to establish Ramberg–Osgood constitutive equations under different laser processing parameters. Experimental data show that the yield strength and tensile strength are improved after laser forming, while the elongation percentage is reduced. Based on the distribution of residual stresses as well as residual strains after the laser forming process, the fatigue life under different laser processing parameters is studied using low-cycle fatigue tests. The residual compressive plastic strain is the most important reason for improving the fatigue life of low carbon steel after laser forming. The fatigue fracture mechanism is shown through the analysis of macro-fracture and micro-fracture using the scanning electronic microscope.
Research status and development tendency of sheet metal forming using servo press

XIA Min,XIANG Hua,ZHUANG Xin-cun,ZHAO Zhen

DOI: https://doi.org/10.3969/j.issn.1000-3940.2013.02.001

2013-01-01

Abstract:As a new generation of forming equipment,servo press gradually plays an important role in the field of sheet metal forming.Technical characteristics of servo press were concluded,and the research status of production cost reduction,process optimization and product quality improvement by using servo press were summarized facing to typical sheet metal forming processes,such as blanking,bending and drawing.In addition,based on the advantages like pressure maintaining as well as controllable and precise motion of the slide,the application of servo press in complex hot forming operations,such as hot stamping for high strength steels was summarized.Finally,application and prospects of sheet forging combined with servo control technology were presented.
Non-Traditional Forming Process of Sheet Metal Based on Laser Shock Waves

Jian Zhong Zhou,Hui Xia Liu,Chao Jun Yang,Xiang Guang Cao,Jian Jun Du,M.X. Ni

DOI: https://doi.org/10.4028/www.scientific.net/kem.329.637

2007-01-01

Key Engineering Materials

Abstract:Traditional forming process of sheet metal is realized with Die and Mould, this technique lacks flexibility and used in the Volume production. The forming process of sheet metal based on laser shock waves is a novel and developing technique. Laser shock forming (LSF) and Laser peen forming (LPF) are two different forming process of sheet metal, both of them are based on a mechanical effect of shock waves induced by laser. In this paper, after introducing the mechanism of laser shock wave generating, these two forming process and technique feature are analyzed and compared, some research progresses are presented. It is indicated that forming technique based on laser shock waves are of high-flexible and great potential application in the fields of plastic forming of sheet metal.

Sheet Laser Forming & Research Progress

Process and Development of Laser Forming

The Characteristic and Application of Laser Forming Technology

Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

Numerical Simulation Research on Laser Shock Forming

Research on Full Procedure Simulation of Sheet Laser Forming

RECENT DEVELOPMENT IN LASER MATERIALS PROCESSING

Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

Study on Laser Sine Forming of Sheet Metals

Research Progress in Laser Direct Metal Rapid Prototyping Technology

Research on Procedure Simulation of Sheet Laser Forming on the Basis of Geometrical Parameter Method

Preliminary Studies on Strain Rate Dependence of Laser Shock Forming

Simulation and experimental research on spherical dome by 3D laser forming of square sheet

Research On The Characteristics Of Metal Sheet With Pulse Laser Forming

Research Status on Closed-loop Control Technique of Laser Forming

Theoretical and Experimental Study on Laser Compound Forming of Plate

Experimental Research on Pulse Laser Forming of Metal Sheet

Research Status and Development Trend of Laser Additive Manufacturing Technology

Study on mechanical properties after laser forming

Research status and development tendency of sheet metal forming using servo press

Non-Traditional Forming Process of Sheet Metal Based on Laser Shock Waves