Abstract:Our brief review of existing literature at the start of our paper reveals the disadvantages of using only analytical or numerical macromodel as system-level modeling method. In our opinion, a hybrid macromodel combining analytical macromodel with numerical macromodel offers more attractive advantages. We now present the results of our research on this interesting and, to our knowledge, new subject. First, the MEMS device was decomposed into several combinations of simple components and complex ones. Then the analytic method was used to establish the macromodel of the simple components, and the numerical method was used to establish the macromodel of the complex components. Finally, these macromodel were interconnected to each other according to the original topology of the device for the system-level modeling and rapid simulation. We have demonstrated the excellence of the hybrid macromodel by a z-axis micro accelerometer. The macromodel of the plate mass and the parallel plate capacitor were constructed by the analytical method because of their regular and simple shapes, while the macromodel of the four folded beams were constructed by the numerical method because of their irregular shapes, then these macromodel were interconnected to each other in order to establish the system-level hybrid model. At last, the model was simulated in SaberTMsimulator. The results agreed very well with that of ANSYS (error less than 2%), and the transient simulation time was less than 2min. This shows that the method was efficient for rapidly performing MEMS system-level design.

Macromodeling of Electrostatic Gap and its Application to MEMS Design

Design Method of Non-standard Structure for MEMS Based on Multi-granularity Macro-modeling

Modeling and Simulation of Electrostatic Micropump Based on MEMS

Macromodeling of the electrostatically actuated circular plate based on mode superposition method

Research Status of Macro-Modeling of MEMS Devices for Systems Level Simulations

Macro modeling method for electrostatic-drive silicon diaphragm

Macromodeling Of The Electrostatically Actuated Rectangle Plate Based On Modal Projection

A Mems Electro-Mechanical Co-Optimization Platform Featuring Freeform Geometry Optimization Based on a Genetic Algorithm

Design of Freeform Geometries in a MEMS Accelerometer with a Mechanical Motion Preamplifier Based on a Genetic Algorithm

System-level Modeling of Segmented Deformable Micromirror Using Multi-Port-element Network Method

Electrothermal-driven gap adjustable MEMS comb structure: modeling and simulation of the equivalent circuit macromodel

Hybrid Macromodels for Modeling and Simulation of a Z-Axis Micro Accelerometer

Modeling of Capacitive Microaccelerometers with Squeeze Film Damping and Electrostatic Effects Using Model Order Reduction

A Novel Hybrid Macromodel for MEMS System-Level Modeling and Simulation

A Hybrid System-Level Modeling and Simulation Methodology for Structurally Complex Microelectromechanical Systems

Mathematical modeling of an electrostatic MEMS with tilted elastomeric micro-pillars

A System Level Modeling Method of MEMS Using Multi-Port-Component Network

MEMS nodal modeling and its application to design of integrated microsystems

System-level Modeling and Simulation for an Electrostatic-Feedback Microaccelerometer Based on Equivalent Electrical Representation

Modeling Electrostatic MEMS Actuator

RESEARCH ON COUPLED ELECTRO-MECHANICAL ANALYSIS AND APPLICATION FOR TYPICAL COMPONENTS IN MEMS