Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

Modeling Electrostatic MEMS Actuator

Modeling and Simulation of Electrostatic Micropump Based on MEMS

Macromodeling of the electrostatically actuated circular plate based on mode superposition method

Macromodeling Of The Electrostatically Actuated Rectangle Plate Based On Modal Projection

Macro modeling method for electrostatic-drive silicon diaphragm

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

A New Modeling Method of MEMS System's Noise

Model of Electrostatic Actuated Deformable Mirror Using Strongly Coupled Electro-Mechanical Finite Element

Modeling of Contact and Stiction in Electrostatic Microcantilever Actuators

Modeling the Electrostatic Deflection of a MEMS Multilayers Based Actuator

Mathematical modeling of an electrostatic MEMS with tilted elastomeric micro-pillars

Coupled-field finite element analysis of MEMS compound electrostatic actuator by using the ANSYS software

Modeling of a micropump membrane with electrostatic actuator

Dynamics of Electrostatic MEMS Actuators

Theoretical modeling and experimental investigation of in-phase resonant MEMS mirrors with cascaded structures

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

Modeling and closed loop control of a polymer composite-based hard-magnetic micromirror for optical switching applications

Modeling of an electrostatic micromotor based on a levitated rotor

Design and Simulation of an Active Electrostatic Bearing for MEMS Micromotors

Dynamics of Ferroelectric Negative Capacitance -- Electrostatic MEMS Hybrid Actuators

The Response of Electrostatic MEMS Structure under Mechanical Shock and Electrostatic Forces