Abstract:High-precision and power-efficient sensor interfaces have become increasingly ubiquitous as they form an integral part of multiple fast-growing sectors such as instrumentation control, medical devices, and agricultural automation. Much progress has been recently made in direct-digitization sensor readout circuits (DD-RO). By skipping the instrumentation amplifier (IA) and connecting the ADC directly to the sensor, this architecture reduces system-level complexity compared to conventional IA plus ADC solutions. However, several challenges must be considered. First, in the absence of an IA, it requires a high dynamic range (>90dB) ADC to process the cross-scale input signals and disturbances spanning from several μV to hundreds of mV while retaining excellent sensitivity and linearity, which would usually entail excessive power dissipation. Such demanding DR can be relaxed by a spectrum-shaping $\Delta-\Delta\Sigma$ ADC [1] (Fig. 1). However, $\Delta-\Delta\Sigma$ ADCs are better suited to the spectral characteristic of bioelectrical signals and disturbances (electrode offset, power-line interference, and motion artifact), whose amplitudes decrease approximately with frequency. Second, conventional ADCs typically exhibit finite input impedance that hampers their direct interaction to high-impedance sensors due to the deterioration of total common-mode rejection ratio (T-CMRR) and gain accuracy. Prior art DD-ROs rely on a positive feedback loop (PFL) [2] or pre-charging buffers [3] for impedance boosting, but the former requires dedicated manual calibration while the latter suffers from additional noise, power, and area overhead. Alternatively, a $\Delta\Sigma$ ADC employing the $\mathrm{G}_{\mathrm{m}}-\mathrm{C}$ integrator provides high input impedance (Fig. 1 bottom left), and $\mathrm{G}_{\mathrm{m}}$ can be linearized by degeneration [2], [4]–[6] or fully differential transconductors embedded in current feedback [7] [8] (Fig. 1 bottom right). However, $\mathrm{G}_{\mathrm{m}}$ often dissipates more power to accommodate out-of-range input signals while retaining linearity.

High Precision Interface Chip for Integrated Sensor

Low Noise CMOS Front-End Amplifier Used in Detection of Extracellular Neural Signals (ENG)

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

An Interface Chip for Atomic Sensor With Highly Integration Using Multi-Voltage Reference

A 72-Channel Resistive-and-Capacitive Sensor-Interface Chip With Noise-Orthogonalizing and Pad-Sharing Techniques

An Integrated Low-Voltage Ultra-Low-power Reconfigurable Hardware Interface in 0.18-Μm CMOS

A CMOS Detection Chip for Amperometric Sensors with Chopper Stabilized Incremental △∑ ADC

Ultra-low noise front-end design for smart optical sensors with high sensitivity and wide dynamic range

Design on High Precision, Multi-channel Data Acquisition System with AD7738

A High-Order Sigma-Delta Accelerometer Interface Circuit

A 1-V 1.1-&Amp;#x03bc;w Sensor Interface IC for Wearable Biomedical Devices

A 23.8-Bit ENOB, ±5V Input Range Readout Circuit for High Precision Sensor Applications with 173.7Db-Fom

A I-V 36-pW low-noise adaptive interface IC for portable biomedical applications

Study of a High-Precision Read-Out Integrated Circuit for Bridge Sensors

A Low Noise Sigma-Delta Microaccelerometer Interface Circuit

High-precision Vernier-type Optoelectronic Integrated Chip Design

A 24-Bit Sigma-Delta ADC with Configurable Chopping Scheme.

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

A 103.6Db-Sndr 760Mvpp-Input-range 7.8Gω-Input-impedance Direct-Digitization Sensor Readout with Pseudo-Differential Transconductors and Dummy DAC

A Low-Noise CMOS Interface Circuit for Resonant Pressure Sensor

Integrated Cmos Amplifier With Offset Rejection Scheme For Sensor Application