Abstract:An incremental analog-to-digital converter (I-ADC) with chopper stabilization (CHS) and self-calibration techniques is presented to meet the requirements of high resolution,low power consumption and small area for measuring devices of ultra-low-frequency signals.The I-ADC has the function of reset operation to avoid pattern noise caused by ultra-low-frequency signals.A first-order architecture is adopted for the I-ADC to reduce power consumption and chip area,and to achieve 14-bit resolution by increasing certain conversion time.The chopper stabilization technique is employed to eliminate the influence of amplifier's low-frequency noise and offset on the I-ADC's precision,and power-on self-calibration is employed to eliminate the systematic offset of the I-ADC.The circuit of the I-ADC and the layout of the modulator are designed with the DongBu 0.5 μm BCD technology.Simulation results in an input range of -156.25～156.25 mV show that the maximum absolute conversion error of the I-ADC is 21 μV,the maximum errors of differential nonlinearity and integral nonlinearity are 0.12 and 0.21 bit,respectively,and the average current consumption of the modulator is only 20 μA.The modulator occupies a chip area of only 150 μm × 310 μm.The proposed I-ADC achieves 14 bit resolution,which is required by ultra-low-frequency signal measuring systems,such as lithiumion battery coulometer,and has significant advantages of low power consumption and small area.

An Interface Chip for Atomic Sensor With Highly Integration Using Multi-Voltage Reference

A 14-B BW /power Scalable Sensor Interface with a Dynamic Bandgap Reference

3.4 A 14b 98Hz-to-5.9khz 1.7-to-50.8 Μ W BW/Power Scalable Sensor Interface with a Dynamic Bandgap Reference and an Untrimmed Gain Error of ± 0.26 % from −40°C to 125°C

A High-Performance Interface ASIC for Quartz Rate Sensor

High Precision Interface Chip for Integrated Sensor

An Integrated Low-Voltage Ultra-Low-power Reconfigurable Hardware Interface in 0.18-Μm CMOS

Ultra-Low-Power Interface Chip for Autonomous Capacitive Sensor Systems

A 1-V 1.1-&Amp;#x03bc;w Sensor Interface IC for Wearable Biomedical Devices

An ASIC Interface for CMUTs-based Biosensors with High Voltage Boosting and Oscillator.

A 72-Channel Resistive-and-Capacitive Sensor-Interface Chip With Noise-Orthogonalizing and Pad-Sharing Techniques

A high-performance interface ASIC for quartz vibrating gyroscope

An Implantable Readout Circuit with On-Chip Reference Buffer for the Detection of Biological Electrical Signals Employing Artificial Intelligence Algorithms to Compensate and Calibrate

A Low Power-Integrated Temperature Sensor Interface Circuit

Energy-Efficient Capacitive Sensor Interfaces

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

A I-V 36-pW low-noise adaptive interface IC for portable biomedical applications

A Multichannel Electrochemical Sensor Interface IC for Bioreactor Monitoring

An A/D Interface Based On Sigma Delta Modulator For Thermal Vacuum Sensor Asics

A fully integrated sensor SoC with digital calibration hardware and wireless transceiver at 2.4 GHz

An Ultra-Low-power CMOS Temperature Sensor for RFID Applications

A −194 Dbc/hz FoM VCO with Low-Supply Sensitivity for Ultra-Low-Power Atomic Clock