Abstract:With the advent of the 5G wireless networks, achieving tens of gigabits per second throughputs and low, milliseconds, latency has become a reality. This level of performance will fuel numerous real-time applications, such as autonomy and augmented reality, where the computationally heavy tasks can be performed in the cloud. The increase in the bandwidth along with the use of dense constellations places a significant burden on the speed and accuracy of analog-to-digital converters (ADC). A popular approach to create wideband ADCs is utilizing multiple channels each operating at a lower speed in the time-interleaved fashion. However, an interleaved ADC comes with its own set of challenges. The parallel architecture is very sensitive to the inter-channel mismatch, timing jitter, clock skew between different ADC channels as well as the nonlinearity within individual channels. Consequently, complex post-calibration is required using digital signal processing (DSP) after the ADC. The traditional DSP calibration consumes a significant amount of power and its design requires knowledge of the source and type of errors which are becoming increasingly difficult to predict in nanometer CMOS processes. In this paper, instead of individually targeting each source of error, we utilize a deep learning algorithm to learn the complete and complex ADC behavior and to compensate for it in realtime. We demonstrate this "Deep ADC" technique on an 8G Sample/s 8-channel time-interleaved ADC with the QAM-OFDM modulated data. Simulation results for different QAM symbol constellations and OFDM subcarriers show dramatic improvements of approximately 5 bits in the dynamic range with a concomitant drastic reduction in symbol error rate. We further discuss the hardware implementation including latency, power consumption, memory requirements, and chip area.

A Multi-Channel Biomedical Sensor System With System-Level Chopping and Stochastic A/D Conversion

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A 16-Bit 64-Channel Adc Without Input Impedance Transformation For Measurement System

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

A 0.00179 mm2/Ch Chopper-Stabilized TDMA Neural Recording System With Dynamic EOV Cancellation and Predictive Mixed-Signal Impedance Boosting

A Single Sar Adc Converting Multi-Channel Sparse Signals

A Low Power Low Noise Analog Front End for Portable Healthcare System

A 95-Db DR Second Order Incremental ΣΔ ADC for Multi-Channel Healthcare Application

A 68 uW 31 kS/s Fully-Capacitive Noise-Shaping SAR ADC with 102 dB SNDR

A 110-nW in-channel sigma-delta converter for large-scale neural recording implants

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers

Deep Analog-to-Digital Converter for Wireless Communication

Hardware-Algorithms Co-Design and Implementation of an Analog-to-Information Converter for Biosignals Based on Compressed Sensing

A fully integrated sensor SoC with digital calibration hardware and wireless transceiver at 2.4 GHz

A Power-Efficient Continuous-Time Incremental Sigma-Delta Adc for Neural Recording Systems

Study of a High-Precision Read-Out Integrated Circuit for Bridge Sensors

A low-offset analogue front-end IC for multi-channel physiological signal acquisition

Towards Flexible and Low-Power Wireless Smart Sensors: Reconfigurable Analog-to-Feature Conversion for Healthcare Applications

A 20 Μw Dual-Channel Analog Front-End in 65nm CMOS for Portable ECG Monitoring System