Abstract:We address the problem of performing simultaneous analog-to-digital (A/D) conversion on multi-channel signals using a single A/D converter (ADC). Assuming that each input has an unknown sparse representation in known dictionaries, we find that multi-channel information can be sampled with a single ADC. The proposed ADC architecture consists of a mixed signal block and a digital signal processing (DSP) block. The channel inputs are sampled by switched-capacitor-based sample-and-hold circuits, and then mixed using sequences of plus or minus ones, leading to no bandwidth expansion. The resulting discrete-time signals are converted to digital sequences by a single ADC or quantizer. At the DSP block, each channel is separated from the digitized mixture through various separation algorithms that are widely used in compressive sensing. For this, we study several techniques for separating the mixture of the channel inputs into the sample number of digital sequences corresponding to each channel. We show that with an ideal ADC, perfect reconstruction of the signals is possible if the input signals are sufficiently sparse. We also show simulation results with a 16-bit ADC model, and the reconstruction is possible up to the accuracy of the ADCs.

A Single Sar Adc Converting Multi-Channel Sparse Signals

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

Ultra-low Power Multi-Channel Data Conversion with a Single SAR ADC for Mobile Sensing Applications

Multi-Channel Sparse Data Conversion with a Single Analog-to-Digital Converter.

A Multi-channel 12-Bits 100ms/s SAR ADC in 65nm CMOS

A Multi-channel 12-bits 100MS/s SAR ADC in 65nm CMOS.

A 0.95-Mw 6-B 700-Ms/s Single-Channel Loop-Unrolled SAR ADC in 40-Nm CMOS

A 1mw Multi-Channel 12-Bit SAR A/D Converter

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

Design of a Low-power Single-channel 8-Bit 1.25GSPS SAR ADC

A Single Channel, 6-Bit 410-Ms/s 3bits/stage Asynchronous Sar Adc Based on Resistive Dac

A Single-Channel 10-Bit 160 MS/s SAR ADC in 65 Nm CMOS

A 300ms/s 57.6db SNDR Single-Channel SAR ADC with Accelerated SAR Logic.

A single channel, 6-bit 410-ms/s asynchronous SAR ADC based on 3bits/stage

A 16-BIT 200KS/S Multi-channel SAR ADC in 55nm CMOS

A Single Channel, 6-Bit 230-Ms/S Asynchronous Sar Adc Based On 2 Bits/Stage

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A 10-B 750µw 200ms/s Fully Dynamic Single-Channel SAR ADC in 40nm CMOS