Abstract:Photopolymerized materials are widely used for a broad range of industrial applications including coatings, three-dimensional (3D) printing, micro/nano-scale fabrications, restorative dentistry, etc. However, the service quality and life of these materials are dramatically impaired by polymerization shrinkage stress evolved during the photopolymerization process in practices. A theoretical model for mechanism exploration and accurate prediction of the shrinkage stress evolution is thus-far inaccessible and strategies for alleviating the stress based on existing studies are quite controversial. Herein, we develop a comprehensive theoretical model that can accurately capture the evolution of the shrinkage stress under various working conditions. The model is established by a time-incremental method based on 3D viscoelasticity theory coupling the evolutions of reaction kinetics and material properties during photopolymerization. Theoretical predictions of the shrinkage stress are then validated by groups of experimental measurements using a series of photopolymers and their composites under various testing conditions. We show that our model is able to correctly predict both the individual and combined effects of instrumental compliance, specimen geometry, material composition, and photocuring protocol on the shrinkage stress evolution, results of which well clarify the diverse conflicts existed in the literature. The magnitudes of the predicted stresses based on our model agree quantitatively with those of the experimental ones, far exceeding the prediction accuracy of all existing models. In addition, our model also successfully predicts the results measured in the literature using various testing devices, indicating that our model could be applied to existing setups for shrinkage stress measurement of bulk materials. Our theory-experiment-combined study not only provides a theoretical approach to accurately predict and thoroughly uncover the shrinkage stress evolution during photopolymerization, it will also guide further explorations on shrinkage stress reduction and material property optimization for photopolymers with improved service life. Additionally, the presented model on the shrinkage stress evolution paves a potentially new way for the derivation of material mechanical property evolutions and thus revealing the mechanical-chemical-coupled mechanisms during photopolymerization.

Model of Shrinking and Curl Distortion for SLS Prototype S

Effect of Process Parameters on Distortions Based on the Quantitative Model in the SLM Process

Machining Distortion Prediction of Aerospace Monolithic Components

Experiment and Numerical Simulations of a Slug Rivet Installation Process Based on Different Modeling Methods

Study about the Warping Distortion of Selective Laser Sintering Rapid Prototyping Workpiece

Towards a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force

Study on key technologies of straightening large-scale integrated part's distortion due to machining

Shrinkage stress evolution during photopolymerization: theory and experiments

Construction and Compensation of a Dimensional Accuracy Model of a Powder Bed via Laser Sintering

Simulation and experimental analysis on the deformation rate on slender rod parts during the recoating process in high viscosity ceramic stereolithography

A novel experimental method for in situ strain measurement during selective laser melting

Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion

Forming deviation coupling model and control method in the photopolymerization process of ceramic slurry

Improving component dimensional accuracy in electron beam powder bed fusion by addressing nonlinear deformations with 3D compensation strategies

Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features

An Analytical Model for Rapid Predicting Molten Pool Geometry of Selective Laser Melting (SLM)

Advances in Thermal Modeling of Selective Laser Sintering of Metal Powders

Semi-empirical model for rubber shrinkage and debonding in solid rocket motors

A model of plastic shrinkage

Influence of Boundary Model Between Casting and Mold on the Accuracy of Numerical Simulation for Rapid Tooling