Abstract:In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.

Influence of Boundary Model Between Casting and Mold on the Accuracy of Numerical Simulation for Rapid Tooling

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Study on Numerical Simulation of Mold Filling and Heat Transfer in Die Casting Process

An Improved Mathematical Model to Simulate Mold Filling Process in High Pressure Die Casting Using CLSVOF Method and CSF Model

Numerical Simulation of Fluid Flow and Heat Transfer During Mold Filling for Die Casting

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Thermal stress simulation considering mechanical interaction between casting and mold

Modelling and Simulation for Die Casting Mould Filling Process Using Cartesian Cut Cell Approach

Study on numerical simulation of mold-filling and solidification processes of shaped casting

Numerical Simulation on Thermo-Mechanical Coupling in Bloom Mold by Finite Element Method

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Dimensional control of ring-to-ring casting with a data-driven approach during investment casting

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

Progress on Numerical Simulation of Mold Filling and Solidification Processes of Shaped Castings

Study on Macro- and Micromodeling of the Solidification Process of Aluminum Shape Casting

An Integrated Approach to Study the Hot Tearing Behavior by Coupling the Microscale Phase Field Model and Macroscale Casting Simulations

Integrated Simulation of Castings Deformation during Casting and Heat Treatment Processes

Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting

Numerical Simulation for the Investment Casting Process of a Large-Size Titanium Alloy Thin-Wall Casing