Mathematical modeling of plane-strain bending of sheet and plate
Chuantao Wang,Gary Kinzel,Taylan Altan
DOI: https://doi.org/10.1016/0924-0136(93)90164-2
IF: 6.3
1993-11-01
Journal of Materials Processing Technology
Abstract:Plane-strain (or straight-line) bending is a major sheet-forming operation. Precise prediction of springback is a key to designing bending dies, to controlling the process and the press, and to assessing the accuracy of part geometry. In this paper, a complete theory and reliable mathematical models for plane-strain sheet bending have been established to predict springback, bendability or the minimum bending ratio (R/t), strain and stress distributions, and the maximum loads on the punch and the die. The elastoplastic bending model incorporates the true (non-linear) strain distribution across the sheet thickness. Swift's strain-hardening law, Hill's (1979) non-quadratic yield criterion for normal and planar anisotropic materials, and the plane-strain deformation mode. A computer code called “BEND” has been developed to simulate the air bending and die bending processes with a U-die, a V-die, and a wiping-die. Simulation results were compared to experimental data, good agreement being observed. Air bending simulations show that the springback angle is proportional to the bending moment and the bent arc length between the punch and the die. The bending moment is greater for materials with higher strength, strain hardening and normal anisotropy, which increase the springback. For such materials, decreasing the bent arc length by reducing the die opening or die clearance is an effective way to reduce the springback. In air bending, springback can be compensated for by overbending through a deeper punch stroke and the necessary stroke can be preset in the press controller using the predicted curve of springback vs. stroke.
materials science, multidisciplinary,engineering, manufacturing, industrial