Abstract:Now 1000-kV ac ultra-high voltage transmission line has been put into operation in China, the transmission tower reaches about 70 m to 90 m high, and 30 m to 60 m wide. So, the 1000-kV transmission line has a wide lightning induced area. On the other hand, the operation voltage is very high, all these increase the probability of lightning striking UHV transmission lines. Due to insulation level of the 1000-kV transmission line is very high, so the threaten of direct lightning stroke is very small, but the high towers increase the shielding failure probability. In this paper, we proposed a numerical model to analyze the shielding failure characteristics of 1000- kV ac transmission line with the lightning leader propagation process considered, the electrical field of the system including lightning leader, transmission line and ground is solved. According to analysis results, we found if the span between two overhead ground wires of transmission line is too wide, a new phenomenon of middle-phase shielding failure takes place, the downward lightning leader of current magnitude higher than 100 kA would strike the middle phase conductor bypassing the ground wires. The middle-phase shielding failure is caused by the very high operation voltage of 1000-kV ultra-high voltage transmission line and wide designed span between two ground wires. The mechanism to generate this phenomenon is different from that of small lightning current, and the EGM can not properly explain this phenomenon. For the cat-head tower, the high shielding failure probability is caused by the middle-phase shielding failure, but for the cup tower, the shielding failure mainly takes place on the side phases. At last, the related measures to improve the lightning performances of 1000-kV ultra-high voltage transmission line are discussed. Three ground wires had been applied in the 2 km section of 1000-kV Jindongnan-Nayang transmission-line near the 1000-kV substation.

Analysis on Explosion of Toughened Glass Insulators Occurred in 500 kV Tianping Double Transmission Lines

Novel Approaches to Assess the Mechanical Reliability of Toughened Glass Insulators used in Transmission Lines

State-of-the-art of Toughened Glass Insulators

Contact Failure Characteristic Test and Overheating Analysis of UHV GIL Electrical Connection Structure

Analysis of causes of outdoor insulators damages on HV and UHV transmission lines in China

Research of the Lightning Protection Performance for 220 Kv Double-Circuit Transmission Line

Puncture Phenomena and Mechanism Analysis of a RTV Coated Cap and Pin Insulators in a Steep-Front Impulse Voltage Test

Characteristics of Three Kinds of Insulators and Their Applications Evaluation at Them in UHV Transmission Lines

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

220Kv Transmission Line Fault Diagnosis and Analysis

Research status of the external insulation pollution flashover of high voltage transmission line

Analysis of Insulation Breakdown of Two Sides Breaker in 220 kV Transmission Line Caused by Multiple Lightning Strikes

Fault Analysis and Modified Measures of 500 Kv Compact Transmission Line

Analysis of explosion on 35 kV voltage transformer in 500kV substation

Operational Analysis on 500kv Three Gorges Overhead Power Transmission Line

Causes Analysis of Burst Fault for 500 kV Porcelain Bushing Based on Explosion Theory

Corrosion Mechanism and Process of Hardware of Disc Suspension Type Insulators on ±800 Kv Transmission Lines

Lightning shielding failure analysis of 1000-kV ultra-high voltage ac transmission line

Explosion impact strength calculation and failure analysis of glass fiber-reinforced composite pipe

Study on the voltage-sharing performance of porcelain insulators on 750kV compact double circuit transmission line