Effect of complexing agent on iron base zinc-nickel alloy coating
Yu Tian,Haokun Wang,Aoxue Zhu,Mingshan He,Baoying Zhang,Xigui Sun,Lei Shi
DOI: https://doi.org/10.1080/00150193.2024.2320561
2024-11-18
Ferroelectrics
Abstract:The influence of four complexing agents on corrosion resistance of Zinc-Nickel (Zn-Ni) alloy coating was investigated. The current density and plating time were determined by Hull and rectangular tank experiments. The effects of triethanolamine, potassium sodium tartrate, tetraethylenepentamine and sodium citrate on the properties of iron-based Zn-Ni alloy coatings were studied under the same electroplating process. The surface morphology, structure, elemental composition and corrosion resistance of Fe-base Zn-Ni alloy coatings with different complexing agents were analyzed. The surface and morphology of the coating were analyzed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The anticorrosive properties of the coating were evaluated by electrochemical electrode and electrochemical impedance spectroscopy (EIS). The self-corrosion current density of triethanolamine is 2.927e-005A·cm −2 , the rate of corrosion is minimal, rendering the material highly resistant to corrosion; the surface remains flat and exhibits a dense texture. The content of potassium, sodium, Zn and Ni in tartrate increased, thus reducing the corrosion resistance and flatness of the coating. The self-corrosion current density was 9.400e-005A·cm −2 . The surface was rough and uneven, and there were a large number of large concave and convex defects. The complexing agent enhances the adhesion and corrosion resistance of the coating, improves the optical and mechanical properties of the coating, adjusts the durability and stability of the coating, increases the crystal packing density, increases the coating thickness, improves the adhesion with the substrate interface, and optimizes the uniformity of grain distribution. These factors are the key factors that determine the corrosion behavior of Zn-Ni coatings. In the process of electroplating, the addition of complexing agent can improve the quality of the coating, and suitable complexing agent can obtain smooth and bright coating at the same time, make the corrosion resistance of the coating higher.
materials science, multidisciplinary,physics, condensed matter