Abstract:One of the primary factors hindering the development of 2D material-based devices is the difficulty of overcoming fabrication processes, which pose a challenge in achieving low-resistance contacts. Widely used metal deposition methods lead to unfavorable Fermi level pinning effect (FLP), which prevents control over the Schottky barrier height at the metal/2D material junction. We propose to harness the FLP effect to lower contact resistance in field-effect transistors (FETs) by using an additional 2D interlayer at the conducting channel and metallic contact interface (under-contact interlayer). To do so, we developed a new approach using the gold-assisted transfer method, which enables the fabrication of heterostructures consisting of TMDs monolayers with complex shapes, prepatterned using e-beam lithography, with lateral dimensions even down to 100 nm. We designed and demonstrated tungsten disulfide (WS2) monolayer-based devices in which the molybdenum disulfide (MoS2) monolayer is placed only in the contact area of the FET, creating an Au/MoS2/WS2 junction, which effectively reduces contact resistance by over 60% and improves the Ion/Ioff ratio 10 times in comparison to WS2-based devices without MoS2 under-contact interlayer. The enhancement in the device operation arises from the FLP effect occurring only at the interface between the metal and the first layer of the MoS2/WS2 heterostructure. This results in favorable band alignment, which enhances the current flow through the junction. To ensure the reproducibility of our devices, we systematically analyzed 160 FET devices fabricated with under-contact interlayer and without it. Statistical analysis shows a consistent improvement in the operation of the device and reveals the impact of contact resistance on key FET performance indicators.

Research progress of MIS for source/drain contact resistance reduction

(Invited) Technology Options to Reduce Contact Resistance in Nanoscale III-V MOSFETs

Nige Metal Source/Drain Ge Pmosfets For Future High Performance Vlsi Circuits Applications

Modeling of the Influence on Effective $\textit{v}_{\text{th}}$ from Interface States, Short Channel Effects, and Contact Resistance in SiC MOSFETs

Modulation and Extraction of Schottky Barrier Height for Advanced Source/Drain Contact

Contact Resistance Optimization in MoS${_2}$ Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications

Reducing contact resistance of MoS2-based field effect transistors through uniform interlayer insertion via atomic layer deposition

A study of source/drain-on-insulator structure for extremely scaled MOSFETs

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts

An elevated source/drain-on-insulator structure to maximize the intrinsic performance of extremely scaled MOSFETs

A Novel Contact Engineering Method for Transistors Based on Two-Dimensional Materials

4H-Sic Trench Gate Lateral MOSFET with Dual Source Trenches for Improved Performance and Reliability

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

Recent Progress in Contact Engineering of Field-Effect Transistor Based on Two-Dimensional Materials

A "click" Reaction to Engineer MoS2 Field-Effect Transistors with Low Contact Resistance.

Research on the Impact of Trapped Charges at SiC/SiO2 Interface on the Short-circuit Performances of SiC MOSFET

Metal Silicides In Advanced Complementary Metal-Oxide-Semiconductor (Cmos) Technology

4H-Sic Trench Gate Lateral MOSFET with Deep-Shallow Source Trench for Improved RESURF Dose Window and Reduced Oxide Field

Experimental Results on Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Contact Resistance Engineering in WS2-Based FET with MoS2 Under-Contact Interlayer: A Statistical Approach

Extraction Method of Interfacial Injected Charges for SiC Power MOSFETs