Abstract:Background A set of nozzle systems for proton therapy is now being developed at China Institute of Atomic Energy. To realize the measurement of beam dose, a set of charge measurement electronics is designed, which is used to measure the output charge signal of the ionization chamber integration plane. Also, the charge measurement device can be used to measure the position information of ion chamber strips just by changing certain parameters. Methods The device realizes the integration and amplification of charge by IVC102, a precise low-noise integrator, and the DSP controls the ADC to collect and process the data. Modbus communication protocol is used to realize communication with the host computer which makes it possible to read data and set the parameter. Results A fixed charge generator is designed to generate 20 pC to 2 nC charge, which is used to test the measuring accuracy of electronics. The results have shown that the accuracy is within 0.62% in the above charge range. Conclusion After experimental tests, the front-end electronics meet the design goal and play a certain pre-test and verification role in the dose and beam position monitoring in the proton therapy system.

Research on Linearity of Charge-Sensitive Amplifier and Charge Integrating ADC in Particle Track System

Application of Particle Track System BEPC Test Beam

Sensitive Charge Amplifier for MWPC in Particle Track System

Trigger circuit of data acquisition system in particle track system and its position resolution

Monitoring the Charge Bunch-by-bunch for the SSRF Storage Ring： Development and Application

Design and Test Results of A Low-Noise Readout Integrated Circuit for High-Energy Particle Detectors

A Main Amplifier Circuit and Data Acquisition System for Charged Particle Detector Array

A 128-channel picoammeter system and its application on charged particle beam current distribution measurements

A Fully Integrated CMOS Readout Circuit for Particle Detectors

Study and Application of Low Pressure Multi-Wire Proportional Chambers

Characterization of a CMOS pixel sensor for charged particle tracking

System Modeling of Particle Detector Circuit

System Modeling of ADC in Particle Detector Readout Circuit and Its Parameters' Design

A 48_channle charge sensitive preamplifier for silicon strip array detector system

Particle Detector Readout Integrated Circuit of 0.18 Mu M Technology with 164 E Equivalent Noise Charge

Design of the Front-End Electronics for Parallel Plate Ion Chamber

Development Of Low Pressure Position Sensitive Multiwire Proportional Chamber

Study of A Multi-Wire Proportional Chamber with A Cathode Strip and Delay-Line Readout

Charge Measurement System at 100mev Linac

A Position-Sensitive Micro-Channel Plate Detector with A Parallel-Strip Resistive Anode and Integrated Charge-Sensitive Amplifiers

Particle Detector Readout Integrated Circuit of 0.18μm Technology with 164 E Equivalent Noise Charge