Abstract:Based on separated flow, a theoretical three-fluids model predicting for annular upward flow in a vertical narrow annuli with bilateral heating has been developed in present paper. The theoretical model is based on fundamental conservation principles: the mass, momentum, and energy conservation equations of liquid films and the momentum conservation equation of vapor core. Through numerically solving the equations, liquid film thickness, radial velocity, and temperature distribution in liquid films, heat transfer coefficient of inner and outer tubes and axial pressure gradient are obtained. The predicted results are compared with the experimental data and good agreements between them are found. With same mass flow rate and heat flux, the thickness of liquid film in the annular narrow channel will decrease with decreasing the annular gap. The two-phase heat transfer coefficient will increase with the increase of heat flux and the decrease of the annular gap. That is, the heat transfer will be enhanced with small annular gap. The effects of outer wall heat flux on velocity and temperature in the outer liquid layer, thickness of outer liquid film and outer wall heat transfer coefficient are clear and obvious. The effects of outer wall heat flux on velocity and temperature in the inner liquid layer, thickness of inner liquid film and the inner wall heat transfer coefficient are very small; the similar effects of the inner wall heat flux are found. As the applications of the present model, the critical heat flux and critical quality are calculated.

Theoretical Investigation on Critical Heat Flux of Annular Flow in Narrow Annular Channel

Theoretical study on the characteristics of critical heat flux in vertical narrow rectangular channels

Theoretical Calculation Of The Critical Heat Flux In Annular Upward Flow In Vertical Narrow Rectangular Channels

Analytical Model Study Of Critical Heat Flux In Rectangular Narrow Channel

Theoretical analysis of the characteristics of critical heat flux in vertical narrow rectangular channels under motion conditions

Analysis Model of Critical Heat Flux in Rectangular Narrow Channels

Theoretical Calculation of Annular Upward Flow in A Narrow Annuli with Bilateral Heating

Experimental Study on Critical Heat Flux in Bilaterally Heated Narrow Annuli

An Investigation of Flow Characteristics and Critical Heat Flux in Vertical Upward Round Tube

Numerical Study on Effect of Gap Width of Narrow Rectangular Channel on Critical Heat Flux Enhancement

Analyses on Heat Transfer Characteristics of Single-Phase Turbulent Flow in Narrow Annular Channel

A Critical Heat Flux Model for Unilateral Heating Rectangular Narrow Channel

Numerical Investigation on the Dryout Point of Annular Flow in the Upward Narrow Annuli with Bilateral Heating

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Numerical Analysis on Annular Flow Model in Narrow Annular Gap

Experimental Investigation on Critical Heat Flux in Bilaterally Heated Annulus with Equal Heat Flux on Both Sides

A Theoretical Model of Annular Upward Flow in A Vertical Annulus Gap

Theoretical Investigation on Dryout Point of upward Annular Flow in Narrow Gap with Bilateral Heating

Phenomenological Modelling of Chf in Annular Flow in Annuli Using New Models of Droplet Deposition and Entrainment

A Prediction Model for Annular Flow in Vertical Narrow Annular Gap

Study on CHF Characteristics in Narrow Rectangular Channel under Complex Motion Condition