Abstract:CFD methodology for subcooled flow boiling is significantly affected by the heat flux partitioning model, which plays a crucial role in predicting the mass source term generated by wall boiling of the liquid phase. Although numerous models have been proposed, most research efforts have focused on the spatial dimensions of boiling heat transfer mechanisms, neglecting the temporal aspect. This study presents a heat flux partitioning model for subcooled flow boiling that considers both temporal and spatial dimensions. The model accounts for the contribution of heat flux from the superheated liquid layer during the bubble growth stage, liquid convection during the bubble wait stage within the bubble influence area in the temporal dimension, and heat flux from the overlapping area of bubble influence in the spatial dimension. An approach was developed to determine the bubble influence area by considering the bubble interaction based on the stochastic nature of nucleation sites on the heated wall, verified by the Monte Carlo method. The bubble dynamics parameters were experimentally derived to reduce the uncertainty associated with the boiling sub-models on the calculation. A comparative analysis of boiling curves and wall heat flux partitioning was conducted between the present model and the RPI model under various flow conditions. The results indicate that both models could reasonably predict the boiling curve. However, the RPI model tends to over-predict the proportion of evaporative heat flux, which is considered a weakness. Based on physical principles, the present model accurately captures the fundamental trend of wall heat flux partitioning. This research enhances the understanding of subcooled flow boiling and increases confidence in multiphase CFD methodology predictions.

A Model of Film Boiling Thermal Hydraulics on a Hot Particle Dropping in Coolant Liquid

Experimental study of heat and dynamic characteristics of hot particles moving in coolant under film boiling condition

Thin liquid film flow and heat transfer under spray impingement

A heat transfer model for liquid film boiling on micro-structured surfaces

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Evaporation Drag Model of High Temperature Particles Moving Inside Coolant

Model for Distribution of Heated Falling Liquid Film on Vertical Solid Planar Surface

Film Boiling Heat Transfer for Liquid Flowing with High Velocity

Study on Heat Transfer Performance of Spray Cooling: Model and Analysis

About the 3D simulation of the boiling of liquid films and spray droplets during their contact with hot substrates

A Simple Heat Transfer Model for Laminar Film Condensation of Superheated Vapours on A Vertical Plate

Theoretical modeling of the drag reduction influenced by film boiling heat transfer on a spherical body

An Experimental Study on the Movement Mechanism of the High-Temperature Particles Falling into the Coolant Pool

Numerical Study on Liquid-Film Cooling at High Pressure

Study on the Temperature Distribution of Heated Falling Liquid Films

Analysis of film boiling heat transfer mechanism for solid particulate adulterate into cooling fluid

Coupling Effect Between Film Boiling Heat Transfer and Evaporation Drag Around a Hot-Particle in Cold Liquid

Particle cooling in Vaporizing Coolant

Experimental Investigation on the Dynamic Characteristics of Molten Droplets and High-Temperature Particles Falling in Coolant

A Unifying Bubble-Layer-Based Theoretical Model for Flow Boiling and Application to a Rod Bundle

A Prediction Model for Annular Flow in Vertical Narrow Annular Gap